Could someone please give me a part # for these hydraulic fittings on this bank. I went to kubota dealer and they can't seem to find them. I need to change the fittings on hydraulic hoses for snowblower so that I can hook them up to that bank or manifold on the tractor. Thanks
Hydraulic fittings
- Thread starter BX2680MR
- Start date
is their a number stamped on the fitting?
Princess Auto in Brandon should have what you need.
Princess Auto in Brandon should have what you need.
Last edited:
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
They are proprietary you will not get a standard fitting to fit up to them.
A couple choices:
Get another quick connector block and hoses to put on the snow blower. (this is what I would do).
Change the existing connectors to standard couplings.
www.orangetractortalks.com
A couple choices:
Get another quick connector block and hoses to put on the snow blower. (this is what I would do).
Change the existing connectors to standard couplings.
Advice on this connection....
BX23S My FEL disconnect leak(s) have got bad.... I'm gonna take all the fittings off tomorrow and clean up/ inspect /reassemble... Do these fittings use teflon tape? OR are they tapered? I guess I'll find out when I take it apart... I really can't figure out which of the 4 are...
www.orangetractortalks.com
The part number for the male plug is 7J627-85290.
That just happens to look an awful a lot alike the end of a 7J627-66220 (aka Parker FEM-252-4FP).
The female coupler is 7J626-66320 (aka Parker FEM-251-4FP).
I just happen to be selling both the male and female Parker FEM flat face couplers/plugs on eBay as they're popular with the Chinese mini-excavator folks for their attachments if you're unable to locate these locally.
That just happens to look an awful a lot alike the end of a 7J627-66220 (aka Parker FEM-252-4FP).
The female coupler is 7J626-66320 (aka Parker FEM-251-4FP).
I just happen to be selling both the male and female Parker FEM flat face couplers/plugs on eBay as they're popular with the Chinese mini-excavator folks for their attachments if you're unable to locate these locally.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Looks are good, but...
Have you coupled the female parker to the male Kubota coupling?
I don't have his male plug. I provided the Kubota part number for the female coupler if he'd like to try purchasing locally to see if it'd fit.
If it's like the Faster single point coupler they copied, you can use a standard female ISO 16028 'flat face' coupler to connect to the male tip sticking up. Likely 1/4" or 3/8" size.
Top on on this page:
Top on on this page: