xrocketengineer's latest activity
-
xrocketengineer replied to the thread Does this look right?.I just noticed that the seal on one of the bearings of the U joint is peeling off. Might as well replace everything. -
xrocketengineer replied to the thread Does this look right?.I pulled the U joint and I did not find anything obvious. The differential input shaft was tight with no play axially nor radially. The...
-
-
-
-
-
xrocketengineer reacted to Runs With Scissors's post in the thread You can’t spell “idiot” with out “I" with
Like.
Problem is…..I can’t figure out how to get the proper spacing for the bolt holes….. Oh sure….. I can get 5 holes in a circle, but how... -
xrocketengineer reacted to Lil Foot's post in the thread You can’t spell “idiot” with out “I" with Like.
-
xrocketengineer replied to the thread Daily Chuckle.M5 vs. M5 Comparison Test: Which Comes Out on Top? For those of you trying to decide... :ROFLMAO:
-
xrocketengineer reacted to North Idaho Wolfman's post in the thread Does this look right? with Like.
Pull the shaft and U Joint off and inspect the splines on both the U joint and the shaft.
-
I have been feeling (not hearing) a slight knock when in 4wd. I went looking for possible missing pins on the forward U joint but they...
-
Happy new year everyone! If you need help hiding all that money, look me up. (y) (y) Since I am directly between Ohio and...
-
Wish to my Orange brothers and sisters,, May the new year by a joyous and prosperous one for each of you
-
xrocketengineer replied to the thread L275 alternator not charging. Diagnose & overhaul questions.Is this it? I found it right off the bat on Hugo's suggested website. There is plenty of Kubota parts.
-
xrocketengineer reacted to Mr. K's post in the thread Welcome new visitors (and welcome to 2026)! with Like.
As of this posting, we're at just over 8,000 concurrent visitors on the site, which I think is a new all-time record! Webserver behind...
-
xrocketengineer reacted to rh74's post in the thread What type and size of rock/other for this wet hillside? with Like.
I had the same grade and spring problem as you. This was my fix. 1. Dig out some of the slop top on top. 2. Lay down a geo-tex fabric...
