Recent content by WVUFAN

This shows the setup on my current L6060. I just disconnect the hose on the tractor and attach the two hoses from the backhoe. The hydraulic loop should be complete, correct?

I have these ports but they have never been used.

This is how I hooked up my L3240, which worked fine. I simply unplugged the tractor connection and plugged in the two hose from the backhoe.

I believe I’m hooking it up to the 3rd function valve. Just like on my L3240. I haven’t used the ports shown in the graphic.

I hooked it up the same way as my old L3240. One hose from the backhoe to the fixed return port on the tractor and the other hose from the backhoe to the supply hose from the tractor.

I have an older bh92 backhoe and when I hooked the hydraulic hoses up to my new L6060, the backhoe didn’t function. Any and all help is appreciated. My former L3240 operated the backhoe just fine. Thanks

Barlow’s is coming to pick up the tractor later this week. Fingers crossed.

Hello, long time lurker, first time poster. I have a brand new L6060 with cab with 3 hours on it. It was delivered this past Friday and driven around the “farm” then put to bed in the garage. Plugged in the engine block heater before lights out. Next morning went to start ”her” up and nothing...