William1's latest activity
-
William1 replied to the thread Spam attack.Yup, well done OTT Mods! :) Mumbai Reliance Park...... -
Wow sites under attack. Gotta be the biggest one I’ve seen here. Good luck mods! 😎
-
The max lift capacity of your machine is under 1,000lbs -- at the pins, inclusive of the attachment. Considerably less at the tips of...
-
William1 replied to the thread Dealer runaround?.Welcome.to OTT I gotta say, your first post was mis-leading. I admit to knowing next to nothing about your particular tractor but the...
-
William1 replied to the thread ThreeBond 1206c Equivalent.I'd stay withe a ThreerBond 1207. About $25. The sad partis you use so little and the tube, once opened, like caulk, goes bad in time...
-
oooo, thats a good idea too. Anything that involves welding is a good idea! 🍻 (y)
-
William1 replied to the thread Bent Wheel Yoke on RCR1860.Replace it. Then see if you can straighten and reweld the bent area, grind, then save it for an emergency back up.
-
Fixed it for ya! 🍻
-
William1 replied to the thread The Original Tractor Relief Tool™ a Must Have!.Looks like I need another tool. I recently took my BH off, inside a cool building. I made extra sure to do it with a cold tractor (fluid...
-
William1 reacted to TractorReliefTool's post in the thread The Original Tractor Relief Tool™ a Must Have! with
Like.
I'm here to make your Tractor Life Easier! What's up guys. Fellow Kubota Owner here. I manufacture a tool to release the pressure on... -
William1 replied to the thread Mower valve lapping.Before I did anything, I'd do a leak down test to determine if anything needs to be done. If something needs to be done to the...
-
I like to leave to loader alone and not mow. ;)
-
William1 replied to the thread Stupid Question - Engine oil level 1997 L2350F.Mark 2
-
It was a comment on the ads, not the owner or anyone in particular. Your comment was rude.
-
William1 replied to the thread KX 033 excavator question - not a tractor but it's orange.I'm not sure of the interface of the pedals/hand controls on your mini-ex. Most are at floor level. I could see a pebble getting in from...