William1's latest activity
-
William1 replied to the thread KX 033 excavator question - not a tractor but it's orange.Check the control valves to see if debris is in the linkage that inhibits movement. If it backs up fine, its not the tracks -
William1 replied to the thread Yet another Back Hoe Re-Install Question and Comment.No sledge!!! Soft rubber mallet. I could hit my leg with the mallet and not get hurt/bruised. I can 'almost' get the pin in by hand but...
-
-
William1 replied to the thread Yet another Back Hoe Re-Install Question and Comment.I understand.I suspect it is slightly bent from aggressive use of the BH tossing the tractor about. I'm a dolt for,m time to time., well...
-
William1 reacted to North Idaho Wolfman's post in the thread Yet another Back Hoe Re-Install Question and Comment with
Like.
Not much of any bolt action Adjustment can be done to align it. Polish the pins, Polish the holes, use good grease on the pins. Dry fit... -
William1 posted the thread Yet another Back Hoe Re-Install Question and Comment in Service, Repair & Maintenance.Yup, beaten to death but... a little different. BX25D BH taken off in cooler weather, set on a Dolly. Had the locks in, the stabilizers...
-
William1 replied to the thread B2400 Lift Pump Replaced with Electric Pump.Sure there is no debris in the fuel tank obstructing the flow of fuel?
-
That shows you have power to the plugs, but not that the plugs are heating. If you have an ohmmeter, disconnect the wires and measure...
-
I have removed the 3 points hitch and found the piston in the oil 😅 seems I assembled it incorrectly now issue is fixed Thx everyone
-
William1 replied to the thread Just curious.As soon as I begin to pucker. I stop and back up. My dad was somewhat ignorant of pucker. He rolled over on the side of and into the...
-
When I was a new owner of my L6060 I lifted a 900 lb. load off of a delivery truck with my pallet forks. My tires are loaded. The...
-
William1 replied to the thread What is Messick's Smoking.My Kubota dealers are about 25 miles from me. But.... the parts guy lives about a mile from me. So I call, order and tell him to let me...
-
William1 replied to the thread Pneumatic Vs Cordless.Yup, reels are the shizzle. I have them for air and AC extension cords.
-
I feel ya brother. I can fight an air line real quick like. We rerouted the air in the shop last year then went to reels mounted to the...
-
William1 replied to the thread Pneumatic Vs Cordless.I still use air. Need it for blowing things dry, clearing passages. Its there. I only use the rattle gun on wheels and mower blades...
-
William1 replied to the thread Oil/fuel leak.I'd also degrease the area completely, run a little and sprinkle baby powder., then lightly blow it off. It will show you where it is...
