WI_Hedgehog
Anything worth doing is worth overdoing.
---
Kubota BX2370
Arrived and sourcing parts for:
Kubota BX2751 Front PTO Quick Hitch
---
Kubota BX2370
- R3 Turf wheels (front are tubed to help prevent flats)
- R4 Industrial wheels (front are tubed to help prevent flats)
- Front & Rear Tire Chains & tensioners (European pattern) (incoming)
- 2" Rear Wheel Spacers x2 (4" each side)
- BXpanded Underside Armor Skid Plate
- Kubota block heater (waiting to be installed--this really has to go in soon)
- Why I use a block heater and top-grade oil:
https://www.youtube.com/watch?v=fu7PlRsqMyA
- Why I use a block heater and top-grade oil:
- 360° custom lighting (for snow blowing) (still working on it...)
- Fire extinguisher (mount)
- Star Tron Super Concentrated Enzyme Diesel Fuel Treatment (snot blob killer)
1 teaspoon per 5 gallons - Hot Shot's Secret Diesel Extreme Fuel Additive (injector cleaner)
8oz / 20 gal = 2 oz (4 Tbs = 1/4 cup) per 5 gallons - Hydraulic Oil: Kubota Super UDT-2
- Engine Oil: Rotella T6 Full Synthetic
- Front Wheel Gear Oil: Mobil Delvac Full Synthetic 75W-90
- Grease: Lucas NLGI #2 mining (see later note)
- Coolant: Zerex Extended Life Heavy Duty
- Filters: Kubota OEM (complete extra set on-hand)
- BXpanded Piranha Pro Tooth Bar (installed, waiting to be used)
- LandPride Third Function Kit (installed, waiting to be used)
- JU Fabworks Workmaster Bucket Bracket
- (2) 4,700# Forged in USA grab hooks
- (2) 5,000# Tow/Grab Handles
- 2” receiver with 5/8” center hole
- Grease zerk caps (green, easy to see)
- 30mm 1/2" drive shallow impact socket (blade removal)
- All American Blade Sharpener
- Stens MAG-1000 Blade Balancer
- Oregon Mower Deck Leveling Gauge(they're $10 and plastic)
- Grease zerk caps (orange, easy to see against black wheels, elsewhere)
- Commercial 8HP engine, key start
- 3-point hitch adapter
- Front wheel kit (waiting to be installed)
- Wall hanging kit (waiting to be installed)
- Summer: Usually left empty and filled with wood on the way back from cutting wood, balances the FEL both directions that way
- Winter: 120# sand, 200# salt (both bagged, used when needed)
- Tool platform (in the works--rethinking this one, maybe a 3-point hitch tool cage instead with some tools mounted on the FEL)
- Messick's Telescopic Stabilizer Kit (USA made)
- Pat's Easy Change Quick Hitch (USA made)
- LandPride 3-Point 2-Function remote kit (be sure to get the correct kit from the dealer for your BX serial number)
- Summit Hydraulics Top & Tilt cylinders (still incoming-backordered for 9 months so far...)
- 3 blade sets
- 3 shear bolt sets
- Hydraulic Oil: Rotella T4 15W40 Diesel
- WoodMaxx BD-10-0 10 micron hydraulic fluid filter
- ZINGA BE100P 10 micon hydraulic fluid filter
- 4-point soft foot kit
- Automatic feed decrease on overload
- Slip-Clutch PTO Shaft
- 3 hammer sets
- Hydraulic Oil: Mobil Delvac Full Synthetic 75W-90
- Backup camera, implement camera
- Full-screen/split-screen/picture-in-picture
- Multi-channel video recording
- Two-hand professional 10,000 PSI manual grease gun (loaded with Lucas NLGI #2 mining grease, which is overkill for a sub-compact tractor but does survive Wisconsin's hot/wet summers and bitter cold winters)
https://www.youtube.com/watch?v=yqyzW2gC_Pg
https://www.lucasoil.com/product/heavy-duty-mining-and-construction-grease/ - LockNLube rebuildable 10K PSI Grease Gun Coupler
- TEKTON 1/2 Inch Drive Torque Wrench (changing wheels)
- TEKTON 3/8 Inch Drive Micrometer Torque Wrench (installing hydraulics)
- MIXPOWER 14 piece 1/2-Inch Drive Shallow Impact Socket Set, 11-32mm
- 16mm 1/2-Inch Drive Shallow Impact Socket
- 6" adjustable wrench
- BXpanded Hydraulic Pressure Tester (with shim kit)
- Titan 17716 hydraulic O-ring pick set (not yet ordered, rethinking this one...)
- Hydraulic floor jack (frequent wheel swaps)
Arrived and sourcing parts for:
Kubota BX2751 Front PTO Quick Hitch
- Mid-PTO Kit (driveshaft)
- Front PTO Subframe
- Male Quick Hitch
- Hydraulic angling
- Skid Shoe Kit
- Kubota Quick Hitch / hydraulic lift / subframe kit
- Kubota Mid-PTO driveline forward extension kit
- Skid Shoe Kit
- Location
- Milwaukee, Wisconsin, U.S.A.
- Occupation
- Helicopter Pilot: And only 2 heavy landings! (3 if you believe the FAA)
- Equipment
- BX2370 (impliment details in Profile-About)
Followers
Trophies
-
20
Can't get enough of your stuff
Your content has been positively reacted to 250 times. -
15
Seriously likeable!
Content you have posted has attracted a positive reaction score of 100. -
10
Can't stop!
You've posted 100 messages. I hope this took you more than a day! -
10
I like it a lot
Your messages have been positively reacted to 25 times. -
5
Keeps coming back
30 messages posted. You must like it here! -
2
Somebody likes you
Somebody out there reacted positively to one of your messages. Keep posting like that for more! -
1
First message
Post a message somewhere on the site to receive this.