Recent content by tthorkil

The reason that I mentioned turning the auger to let the 'drive dogs' engage is that there is a little slop between them and if the pto was engaged when the 'dogs' were not engaged they would slam together more violently and possibly cause some damage.

Look Here for the parts breakdown/list/part numbers

The reason that it is in the assembly section is that part is a portion of the LX2940 SUBFRAME & 4-POINT HITCH - the framework behind the snowblower allows for the mounting of the snowblower/snow blade/ and a rotary brush for cleaning snow off surfaces. After removing the snowblower the subframe...

Page 15 of the LX2980 Snowblower Owner's Manual

To turn the auger by hand - PTO(Power Take Off) or Tractor not running - push 'engagement Lever(#1 in drawing) away from snowblower(it has a rather stiff spring) towards front of tractor - this disengages the snowblower from tractor mid-PTO. When done make sure to move engagement lever towards...

Kubota Illustrated Parts List Enter Tractor Model - Search -Click on option Down-Arrows

My neighbor was having problems with his 2nd replacement instrument cluster and I found this listing on ebay for repair. He sent the original cluster in for repair and the cluster was repaired/calibrated and the mileage set - he was satisfied. I believe that this guy has the same equipment that...

Click on Members Icon and then start conversation.

I found the thread from a couple of years ago - Snowblower rotation... Help

A couple of years ago someone posted about a similar issue and resolved the issue by following the troubleshooting directions on page 28 of the manual. The restrictor(s) were plugged if I remember correctly. From Page 28 of manual: if the chute does not rotate well in either direction...

Page 28 of the snowblower user manual - if you don't have the manual reply to conversation message - envelope icon at top right of forum page -

The turnbuckles have right-hand thread on one end and left-hand thread on the other to allow tightening or loosening by turning the center. If you remove the end that has right-hand threads and install a right-hand thread nut on that end then adjust tension of the chain and with 2 wrenches...

Google airlock in heater core?

I used one of these to convert my Harbor Freight portable band saw into a vertical bandsaw.

This looks like it might be what you need. Side Chain Fasteners