timsch's latest activity
-
Ttimsch reacted to bird dogger's post in the thread L275 alternator not charging. Diagnose & overhaul questions with
Like.
I use a "Speed Blaster" brand spot blaster for doing some soda blasting of small parts. Check my Soda Blast kit pics and what I use... -
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.Which blasting gun do you have? (I assume you're satisfied with it). FRom my search, it looks like there are plenty of junk ones out...
-
Ttimsch reacted to Hugo Habicht's post in the thread L275 alternator not charging. Diagnose & overhaul questions with Like.
You have two terminals but you have also the three places where the stator was attached. So you would have access to all diodes...
-
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.One copper washer on one of the studs came off and will be reattached. There were only 2 of these. Re: testing diodes. I only have...
-
Ttimsch reacted to Hugo Habicht's post in the thread L275 alternator not charging. Diagnose & overhaul questions with Like.
There are 6 diodes for the stator (see picture in post #27). Each of them has to be tested in forward and reverse, so that is 12...
-
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.Got the diode plate off. Sandblasted it, removing some of what looks like coating over some of the copper. Not sure if that's a problem...
-
-
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.That looks like it. Good to know. It'll be a few days before I can get back to this. Thanks all. I'll update before long.
-
Ttimsch reacted to bird dogger's post in the thread L275 alternator not charging. Diagnose & overhaul questions with Like.
Since you have both a soldering iron and gun, you probably know about and also have what's called a "solder sucker". If not; It can be...
-
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.Sure, I'll keep this thread updated until it's resolved one way or the other. I do have a soldering iron with a wide tip that should...
-
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.Thanks for all the assistance. I'm planning on putting it back together and testing again rather than tearing it down any further...
-
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.Yes, I do have the shop manual, and it does have a good diagnostic section that I'm working through. It shows the stator and diode...
-
-
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.When I did the continuity check I posted on above, I measured across each pair (10, 2 & 6 o'clock). All had continuity. I then...
-
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.Got the rotor out. Bearing stayed in the housing, but it appears to be in good shape. Brushes move freely & look good as do the...
-
-
Ttimsch replied to the thread L275 alternator not charging. Diagnose & overhaul questions.Thanks all for the inputs, and specifically the recommendations for alternative suppliers. I didn't know about either of those two...
-
Ttimsch reacted to lmichael's post in the thread L275 alternator not charging. Diagnose & overhaul questions with Like.
So a quick search shows pretty much nothing for places to buy the parts. So in all likelihood if/when the day comes I need it, I'll...
