TheOldHokie's latest activity
-
TheOldHokie replied to the thread Front loader for a B7200.I have all of the OEM manuals in original hard copy. The ones for the loader are short and easily scanned. The WSM for the tractor not... -
TheOldHokie replied to the thread Rear axle broke right inside cover.You said your (unidentified) machine suffered that failure did you not? Please tell us what it model and year it is, what you were doing...
-
TheOldHokie replied to the thread Front loader for a B7200.That whole assembly is referred to as the hydraulic outlet block. The right port is pump pressure OUT to the implenent and the left one...
-
TheOldHokie replied to the thread Front loader for a B7200.Yes but. Kubota has a professionally engineered and published specification of 600 pounds at the pins on a B1630 loader. The...
-
TheOldHokie replied to the thread Front loader for a B7200.The raw lift caoacity of the the loader is limited by the geometry and strength of the frame, the number and size of the hydraulic...
-
TheOldHokie replied to the thread L4200 pto problem.Without a WSM I cant speak to the specifics of that tractor but based on these comments it sounds like the PTO is fed by the PS pump. If...
-
TheOldHokie replied to the thread Front loader for a B7200.I understand and share that feeling and I admire and applaud your loader project. But personally, at this stage of my life replicating...
-
TheOldHokie replied to the thread L4200 pto problem.It does not work that way. Dan
-
Who confirmed the break as a design flaw???????
-
TheOldHokie replied to the thread L4400 fel not working.If you used a tee all you would see is the neutral circuit pressure which is maybe 100 PSI. Connect the gauge directly to the port. That...
-
TheOldHokie replied to the thread Front loader for a B7200.Yes. They are standard loader attachments that will fit your SSQA loader right out of the box. Dan
-
TheOldHokie replied to the thread Front loader for a B7200.Right on both counts :) Plus, why make a grapple or a bucket when you have a SSQA loader? Dan
-
TheOldHokie replied to the thread Front loader for a B7200.No - you don't modify the 3 spool valve!!! The 3rd spool on your manual valve will work fine for a third function just as you planned...
-
TheOldHokie replied to the thread L4200 pto problem.I dont have a WSM for your tractor so I have not researched that particular system but main system pressure is 2500 PSI Ostensibly the...
-
TheOldHokie replied to the thread Front loader for a B7200.There sre multiplecways to learn. One is the hardxway - frim misrajes. The easy way is asking questions and avoiding as msny mistakes...
