TheOldHokie's latest activity
-
TheOldHokie replied to the thread L3901 HST dies suddenly.Have you ruled out the seat switch? Dan -
TheOldHokie replied to the thread Oil Leak on Left Front Rim of L3710 4WD.If you are talking about the picture I posted that is a standard OPEN deep groove radial ball bearing also known as a Conrad type ball...
-
TheOldHokie replied to the thread Oil Leak on Left Front Rim of L3710 4WD.This is the OEM beating pictured on Messicks site. Its an open bearing with no shields or seals.
-
-
TheOldHokie replied to the thread Oil Leak on Left Front Rim of L3710 4WD.The OEM bearing is an open bearing - no shields or seals. Lubrication of open bearings comes externslly from their surroundings...
-
TheOldHokie replied to the thread Front loader for a B7200.The number one mistake DIY tractor owners make is oversizing hydraulic hoses. Hose and reservoir sizing charts tend to be oriented...
-
The technique is called metal spinning. When I worked in the production machine shop of a large aerospace firm, (early '70s to early...
-
I had no idea what the end product was going to be until it came off the machine https://youtube.com/shorts/Oh18opaAH8s?si=izE-eBDyOdADaqf1
-
TheOldHokie replied to the thread L4400 fel not working.Ten bucks and next day delivery on Amazon. You are goung to need an adapter fitting for the gauge to hose. Dan
-
TheOldHokie replied to the thread What's cookin' boys?.A Ten Minute Pork Tenderloin Chow Cleaning out the fridge :)
-
-
TheOldHokie replied to the thread L4400 fel not working.The first thing I would suggest is a pressure and flow rate test. You will need a clean 5 gallon bucket and a 3000 PSI pressure gauge...
-
-
TheOldHokie replied to the thread Rear Hydraulics and Tilt Cylinder Lengths.There is nothing "nonstandard" about the third function valve. It is a standard valve, just a different type. The Brand joystick valve...
-
TheOldHokie replied to the thread L4400 fel not working.By backhoe I meant attachment for the tractor. The 3pt lowering speed is controlled by the knob under the seat. Sounds like you have it...
-
TheOldHokie replied to the thread No lift power.Your tractor was working initially. Who put that poppet in upside down and when? Dan
-
TheOldHokie replied to the thread L4400 fel not working.Let me see if I have this right. Neither the loader nor the 3pt work. Is that correct? Do you know the model number of the loader? Do...
-
TheOldHokie replied to the thread Rear Hydraulics and Tilt Cylinder Lengths.The technical answer is a bit too complicated for a full answer. Here is the Readers Digest version. The 3rd function valve is an...
