TheOldHokie's latest activity
-
With the fuse tap, you remove an existing fuse and put it in the tap to power the existing circuit. Then install a new fuse in the other... -
TheOldHokie replied to the thread 12V outlet for ROPS M7060HD?.Possibly more than one supply. Nothing.in there should be electricslly grounded. Addon panels are cheap and easy to add. Dan
-
TheOldHokie replied to the thread 12V outlet for ROPS M7060HD?.You can add them. You just need to determine what size and style the block accepts...
-
TheOldHokie replied to the thread Snowblower Hydraulic Chute movement question.He needs to go both durections. Dan
-
TheOldHokie replied to the thread Grade 5 Shear Bolts.I keep both front pockets full of Grade 5 bolts and nuts when tilling the garden with my Troy Bilt :p Dan
-
TheOldHokie replied to the thread Snowblower Hydraulic Chute movement question.You have the basics. Reversing the hoses on a motor has no effect Reversing the hoses on a cylinder will make it extend in both...
-
I have an open station M6040. I installed an auxiliary fuse block ran to the battery under the dash tied to a relay so it’s only powered...
-
TheOldHokie replied to the thread Bradco 715 front blade attachment.If you cant fully close that valve something is still wrong. You are deadheading the pump sonewhere and you do not want to use it like...
-
TheOldHokie replied to the thread Finish mower front roller.Mine Woods is so bent up I dont think I could get it to bolt up :rolleyes: Dan
-
TheOldHokie replied to the thread Finish mower front roller.Anti-scalp. Dan
-
TheOldHokie reacted to Kennyd4110's post in the thread Snowblower Hydraulic Chute movement question with
Like.
Short answer: Regen or the regenerative function of the loader valve. Longer answer is in many threads via these search results... -
TheOldHokie replied to the thread Grade 5 Shear Bolts.Shear strebgth is proportionsl to cross sectional area in shear. All the groove does is reduce the cross sectional area thats in shear...
-
TheOldHokie replied to the thread 12V outlet for ROPS M7060HD?.I would think the seat sensor circuit is way too light for a fan motor. Thats why you blew the fuse. A properly fused feed from the...
-
TheOldHokie replied to the thread Adding Circuits to L3710 Fuse Box.Pop one of the terminals out and visit the DigiKey website. Dan
-
TheOldHokie replied to the thread Normal for relief valves to stick?.Where was the stuck relief valve? Dan