Swede1962's latest activity
-
Swede1962 replied to the thread power steering for B6100.I better go buy a lottery ticket and fast!! 🚀 -
Exactly. This looks promising. https://maedlernorthamerica.com/partshop/shrink-disc-st-inner-diameter-24mm-pn-61582400/ Dan
-
Swede1962 replied to the thread power steering for B6100.You're amazing on this stuff!! So a sleeve to fit over the spline shaft end and a shrink disc that is keyed to allow the chain drive...
-
Here is a picture of the crankshaft. The pulley is keyed (not splined as I thought) to the crankshaft and the splined end of the crank...
-
Swede1962 replied to the thread power steering for B6100.So the splines I see aren’t part of a bolt on flange? They are part of the crankshaft?
-
Swede1962 replied to the thread power steering for B6100.It’s all I had to measure with. I’ll give my buddy a call on the sleeve. It appears that under the washer are bolts attaching the...
-
Thanks for the measurement. That's a basic match for a DIN 5480 spline but not conclusive without further inspection. Basic specs are ...
-
Swede1962 replied to the thread power steering for B6100.I'm counting 21 splines. And then the mic shows the diameter. Any chance I could purchase a sleeve from you that would work with a...
-
-
Swede1962 replied to the thread power steering for B6100.I’ll do that as soon as I get off work this afternoon. Thx! 👍
-
If you have a mic measure the OD of the splines and post that dimension along with the tooth count. Maybe I csn find a matching sleeve. Dan
-
Swede1962 replied to the thread power steering for B6100.Man I’m learning so much with you guys!! Thanks for the advice excellent video teaching us of all us n the dark something new.
-
Its a taper fit clamping ring. It fits over a thin walled hub and when you tighten the bolts it pulls the two flanges together squeezing...
-
Swede1962 replied to the thread 1980 B6100 4x4 - Looking for loader..I was referring to the other one I have a pic of. Didn’t you build this one?
-
-
Swede1962 replied to the thread 1980 B6100 4x4 - Looking for loader..Have you seen the photos Lil Foot has of the subframe he built? These pic's will explain it like a picture menu at McDonalds! :LOL:
-
Swede1962 replied to the thread power steering for B6100.I'm struggling with drilling holes in the fan belt pulley to attach the flange and shaft. Maybe that is the piece I have to have made...
