Recent content by Sox112NY

If you can get to the connector to the OPC under the dash, it's pretty easy to troubleshoot by testing continuity between 0.5RB and the 0.5LW, 0.5GR, and 0.5YR. The 0.5OR should not be applicable. My issue ended up being the low voltage power to the voltage regulator, but I was able to knock...

I'm having the same issue but I'm not sure that it's the voltage controller yet vs the OPC itself. Here is the pin out on the OPC which is located on the same side as the starter but under the shrowd of the console, bolted to the instrument cluster. The switched can be tested by looking for...