Shadow_storm56's latest activity
-
SThe old girl is slowly coming back to it's prime. I finally got my gasket kit to properly rebuild the injection pump. Other than having...
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.I took it to the machine shop nearby they work with alot of pumps. He said that grove is likely a bearing failed and someone fixed the...
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.Hadn't planned to theres no play or movement in the bearings and the seals are good. There's no signs of wear on the casing.
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.It makes pressure so maybe just balance it
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.Wish I could find a new impeller honestly
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.Also I assume it's by design but there's this weird groove that's not the whole way around too
-
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.Like I said when It's empty it dosen't even vibrate it's only once it's pumping. I wish I knew how to pull the impeller.
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.Could try that plug it may be sized.
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.I can look in through the side outlet. I can get a wire through each slot though
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.So here's normal amount of shake vs this thing going shaking wild. To those just joining it's not the PTO or PTO Angle or anything...
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.
-
-
SShadow_storm56 replied to the thread Pto pump shaking badly? Why.It's had a couple different PTOs never changes the vibration amount. I have it open to that point but can't see anything wrong...
