Shadetree55's latest activity
-
SShadetree55 replied to the thread L345 with 1720 loader issues.Sorry I forgot to update yall. I got it all back together with new keys and set screws. So far it’s working great. Will keep an eye out...
-
-
SThat u-joint is not going to work reliably. on the splined front PTO. You are going to have to find a way to adapt that spline to a...
-
SShadetree55 replied to the thread L345 with 1720 loader issues.Sorry for the delay in getting pictures I’ve had it soaking in oil for a week. Here’s the set up it has now. It is a Kubota branded FEL...
-
-
SShadetree55 replied to the thread L345 with 1720 loader issues.Sorry I know I’m not very good at explaining. I will get pictures of what I’m talking about. The circled parts are essentially what I’m...
-
-
SShadetree55 replied to the thread L345 with 1720 loader issues.Yes the pump is good. Spins free and no play in it. The crankshaft off the tractor is splined. So the set up I have now is soaking in...
-
SI can’t be 100% sure what you have since there were some variations on the way the front PTO was done. I am pretty sure your tractor...
-
SShadetree55 replied to the thread L345 with 1720 loader issues.Awesome thanks! What can I use to attach the other end to the shaft on the tractor? I’ll attach pictures of the shaft I have now in a...
-
SThese work greaf. https://www.mrosupply.com/shaft-couplings-and-collars/564412_cc40-12fb500_linn-gear/
-
SShadetree55 replied to the thread L345 with 1720 loader issues.The pump shaft is keyed
-
SShadetree55 replied to the thread L345 with 1720 loader issues.Thanks. Ended up being a sheared key way.
-
SShadetree55 replied to the thread L345 with 1720 loader issues.Thanks! Pulled the pump off this morning and it was a sheared key way. I think the shaft attaching the pump to the tractor is a home...
-
SThere will NOT be high pressure out of the pump outlet until a valve diverts it to a work port. Think of it like a garden hose...
-
SShadetree55 replied to the thread L345 with 1720 loader issues.Thanks for your help! I did check the fluid level in the external tank. The dipstick is gone but it’s a little over half full. I did add...
-
SThere are several moderators and you can see if/when they are on line on the forum main page. You can start a conversation with them...
-
SShadetree55 replied to the thread L1720 loader with external hyd. pump kaput..Trying to connect my l1720 FEL that isn’t working with the external system anymore. Want to use the hydraulics on my L345dt to run the...
