sgerksinwi's latest activity
-
The L01 series has an over run system built into it as it uses a dog clutch to engage the PTO. -
sgerksinwi replied to the thread Over running Clutch.Thanks that's the information I wanted. I love all this wisdom on this forum for a Ole rookie
-
Your tractor (probably) already has an over run clutch built into it. What happens when you push the clutch in? Does the tractor come...
-
sgerksinwi replied to the thread Over running Clutch.Yes it's a 5ft with a slip clutch. That said L2501 is a small tractor. Just looking for some guidance. Is it worth it??
-
Quick question. I have a L2501 gear driven I use it mostly for trail work and rotary cutter work Do I need a ovet running Clutch? Is it...
-
You probably need to turn the nose (cutting edge) of the bucket up just a bit before putting it in float.
-
Not FEL specific, but you might get some ideas here: https://www.orangetractortalks.com/forums/threads/chainsaw-mount.61747...
-
Here is mine. Has worked great and I have trailered it at 70 mph a great many times with no problems...
-
Anyone out there with pictures of your DIY chainsaw holder for this FEL? Thanks
-
That is a clamping bolt for the splined yoke and is not under shear. Dan
-
sgerksinwi replied to the thread Ironcraft mower part.Thanks for your reply. It's number 8. zzIs it a normal hardness of bolt Will it sheer off if the slip clutch fails? If that's the case...
-
-
sgerksinwi replied to the thread Ironcraft mower part.I'm was wondering if it was a secondary protection..
-
Not if the gear box input is splined or keyed.
-
Just pick up a 1200 series rotary cutter from Ironcraft with slip clutch. My question is does the eccentric bolt that goes to attach...
-
sgerksinwi reacted to FTG-05's post in the thread Tell me your thoughts, cant seem to do it on my own. with
Like.
5' all day long. I run a Howse 7' behind my 40 hp L4330.
