SDT's latest activity
-
SSDT replied to the thread Up a creek."New clutch." This is a red flag and an area that I would suspect firstly after verifying proper operation of the engine. Does the...
-
SSDT replied to the thread Recommended brush hog for L3010?.For your purposes, spending the extra money for a higher quality and more durable cutter is highly questionable.
-
SSDT replied to the thread Front ballast for L4760 when using Woods TKP84.40 mower.I would simply try without weights and add weights only if necessary. They are expensive.
-
SSDT replied to the thread Front ballast for L4760 when using Woods TKP84.40 mower.Probably will not need front weights when on level ground. The FEL grill guard will accept 4 or 5 front weights which will be enough if...
-
SSDT replied to the thread Steering center moves continually..Sounds normal to me for reasons already posed. Yes, I would check/adjust tire pressure and verify that neither brake is partially applied.
-
SSDT replied to the thread RTV1100 Shifting.Foot on brake to relieve hydraulic pressure.
-
SSDT replied to the thread Slip clutch.Having once been a fan of slip clutches, I have learned through extensive experience that they are often/usually more trouble than they...
-
SSDT replied to the thread B1750 Mower Issue.Your tractor can operate a three point mounted 42" rough-cut (bush hog type) mower in most conditions and a 48" one in some conditions.
-
SSDT replied to the thread B1750 Mower Issue.Again, your MMM (belly) mower is designed to mow lawns, not untended area. Though the MMM sold with the B1750 is one of the very best...
-
SSDT replied to the thread B1750 Mower Issue.Mid mount mowers are designed to mow lawns. They are not designed to mow untended areas. What are you mowing? Apparently, your gear...
-
SSDT replied to the thread Minumum tire spacing for safe operation of bush hog.
-
SSDT replied to the thread 3rd party filters.FWIW: "You can pay me now or you can pay me later...." was in a Fram advertisement in the 1980s. Just sayin'.
-
SSDT replied to the thread Who Made My Blade?.Agreed.
-
SSDT replied to the thread I need help everyone..Looks to be a BX model. Cannot determine which BX model from the photo but keys are universal.
-
SSDT replied to the thread B1700 Rough Cut Mower.42" or 48", depending upon conditions.