Recent content by S Chamblee

Wanting to build something to store equipment and have an enclosed shop for working.. I’m thinking 40x40 with half closed in, so would have 20x40 pole barn and 20x40 shop. Those of you that have built in the past what are things you wished you had done and wished you had not done. What about...

The “mode B” instruction reset the computer and fixed the problem, thanks so much!

Great video, thanks for sharing

That brought up my next question.. the dealer said you needed a minimum of 9 GPM hydraulic output. Not sure what my tractor is capable of (2017 L4701 not HST)

Any of you guys running a FEL mounted brush cutter like this? http://lanesharkusa.com/ Interested in something like this to cut around ponds, fence rows, and to cut back brush on wood lines..

I’m trying to reset my E-95 warning indicator on the dash of my tractor.. it’s a L4701. Anybody know how to get this done?

Update: I cleaned out the water separator/filter, changed fuel filter, changed both air filters, changed oil/oil filter, and greased it.. Feeling good that it's all done.. Now have to tackle tiller and bush hog ***128540;

I have cleaned the water separator and will change out the fuel filter also..

The water separater is what had the grit down in the bottom of it.. and it had a small metal screened filter inside of that.. I'm assuming that's a fuel filter?

So I have hit the 200 hr mark on my L4701. I am changing both air filters and when I checked fuel it had some grit in there so changing fuel filter as well.. I am considering going ahead and changing oil/oil filter and hydraulic filter even though it says next change is at 400 hr mark. It has...

thanks for all the replies!! Y'all make me feel a little bit better :) it says 64 oz will treat 300 gal and I did the opposite on what I should have done.. 64/300= .21 oz/gal is what I should have done.. BUT I put 300/64= 40z/gal :eek: Not worried about the kerosene at all but not sure about...

I screwed up on some calculations and I have added to much of this Lucas treatment (https://www.walmart.com/ip/LOP10866-ANTI-GEL-DIESEL-TREATMENT/52622838) to my fuel tank on the tractor (L4701). What is my next best option: 1) run it, it won't hurt anything 2) drain the fuel tank (if this is...

I have a L4701 and she has been a joy around the farm.. These little tractors capabilities are endless..

I am cleaning up some old fence row.. I have cut most of the larger trees down but still have a lot of thick grass/briars/vines.. I have gotten as close as I can get with a bush hog. Was thinking about spraying it.. What is something I could spray that would kill everything including...

I got a new mower and was fixing to sharpen my blades.. My dad has always just free handed it using a bench grinder.. I have seen tools to help sharpen the blades more evenly, are these tools worth it or is free handing it just as good??