Russell King's latest activity
-
RRussell King replied to the thread Rear Wheel Noise.If you have two piece rear wheels you might have looseness at the rim to center plate bolts. Bolts can be loose or there can be...
-
RRussell King replied to the thread Flushing hydraulic fluid from implement.Cylinders are a bit messy but you can do it by taking the hoses off and pressurizing one end with air. The piston will move down and...
-
ROh yeah. Duh. I wasn't thinking about the ground and was just focusing on the positive wiring. Too many years dealing with A/V signal...
-
RRussell King replied to the thread Diagnosing L245 not cranking.The tops are connected to positive power (red highlights) by the jumpers but the bottoms are connected to ground through the block...
-
-
RRussell King replied to the thread Diagnosing L245 not cranking.FIRST STEP OF BLEEDING INJECTORS Yes on the bleed process, first gravity will bleed it through the filter and to the injection pump when...
-
RThanks again. I just noticed the owner's manual has a photo of four fuses in the block even though the wiring diagram only shows three...
-
RRussell King replied to the thread Diagnosing L245 not cranking.There are 4 fuse spots on my L185 and I know that two fuses are connected together on one side (power in). Then one of those two is...
-
RRussell King replied to the thread Diagnosing L245 not cranking.There is a wiring diagram in this thread in post #26...
-
RRussell King replied to the thread Smart guys, SOLAR.That is a really good idea! Thank you for pointing out that type of system, I know they exist but would have never thought of...
-
RFuel filter assembly crack; they replaced it, all is good. I have the old unit, haven't found the crack, but it's covered in crud and...
-
RDisconnect and reconnect all of these:
-
RRussell King replied to the thread L2900/L481 Problem.It sounds like you lost hydraulic power from the tractor to the FEL valve and so no power out of the FEL valve to the 3PH. I suggest...
-
RRussell King replied to the thread Shear Bolt Price Explosion!!.I think there may be a typographical error in your manual. I have never seen anything about a class 6.6 metric bolt. I guess anything...
-
RRussell King replied to the thread Front weights - LX2620.Could you just pick up something heavy with the front end loader?
-
RRussell King replied to the thread Locking Gas Cap.You might look for valve locking covers that might fit. Like these Or call Messick’s and see if the person that designed and 3D...
-
