Russell King's latest activity
-
RRussell King replied to the thread L3901 seat suspension.You might want to look into a bike chain lubricant to apply to the moving parts of the seat. They are generally a wet application that...
-
RRussell King replied to the thread B2100 Hydraulic Fluid Leak.Welcome to the forum. Good advice from whitetiger above. But I noticed a few other things in your picture to be curious about so added...
-
-
RRussell King replied to the thread Need advice L3302 HST.My direct answer to your questions on what to do with the tractor… Sell the tractor and implements as a total package in an AS IS...
-
RRussell King replied to the thread L260 regulator.You might call this salvage yard in California. @007kubotaguy may have a used one that is working.
-
-
RThere is 3 drains total per manual. One at low point in Mid pto. And one on each rear axle housing cases. I drained all 3.
-
RRussell King replied to the thread Camp build.He is asking if this is a “helper”. See the link in his post to a picture!
-
-
RRussell King replied to the thread L225 injection pump.You might also look at the linkage for the shutoff to be sure it is allowing the pump to move to a position where fuel flows again...
-
RRussell King replied to the thread L225 injection pump.You can probably have that one rebuilt by a company that does it professionally like Oregon Fuel Injection...
-
RI get fuel at the bleeder going into the pump but nothing out of it
-
RRussell King replied to the thread B1750 hst service.There may be drains low on the rear wheel drive system cases??
-
RRussell King replied to the thread L35 - BT900 Separation and Derusting.You can coat parts with materials that will keep them from rusting through electroless processes but the rubbing areas will probably be...
-
RRussell King reacted to RKSpees's post in the thread WTB: Kubota L185DT right front knuckle/gear case with
Like.
Just wanted to close this want ad out. I contacted Lance at New Hall Tractor Service and the experience couldn't have gone any better... -
RRussell King replied to the thread L35 - BT900 Separation and Derusting.For some of these parts you can use something that eats the rust off the metal. Like this...
-
RJust got one at the local Coeur d'Alene dealer. Just called a few weeks ago and asked about the program, so and he said he'd check into...
-
RRussell King replied to the thread ROPS installation L175 & L225.See this thread for some installation tips in post #18. https://www.orangetractortalks.com/forums/threads/kubota-l185.7912/#post-59383
