Russell King's latest activity
-
RRussell King replied to the thread Adding a single rear remote.You can NOT tee into the pressure line. The pressure would always flow to the lower pressure line and the implements would not work...
-
RTo close the loop on this I have now run two trials of the pulley Torch did up which included "the hill". Pulley handled everything...
-
RRussell King replied to the thread Front power lift on a Kubota B4200D.Yes
-
RI believe you! If I had the space I would have built (I went so far as to model one up and price the cut parts) or bought a grapple, but...
-
RRussell King reacted to 507 rzr's post in the thread B2920 no crank issue experience solved with
Like.
I am new here but thought I would share my experience as it might help someone in the future. I have a B2920 and really not much... -
RRussell King reacted to chim's post in the thread What did you do to or on your Kubota today? with Like.
Picture was sent to me from a bud who lives on the other side of town. He said the white box bobbing is an Amazon package.
-
RRussell King replied to the thread Lift arms on 2350DT stuttering with auger attachment.I think the mass of the PHD would be greater than the blade. I also think the COG of the PHD is further away from the tractor so it...
-
RRussell King replied to the thread If the rain ever stops.See this site. Seems that a mole plough is common in England to create drainage paths https://rmbuckets.com/mole-plough/
-
RRussell King replied to the thread Options and options for Insulating an A-frame.Look at closed cell spray foam. You may also want to build a second wall with the 2x4 offset from the current ones and increase the...
-
RRussell King replied to the thread What did you do to or on your Kubota today?.Looks like the postman didn’t finish his route today!
-
RRussell King replied to the thread Lift arms on 2350DT stuttering with auger attachment.That all looks like perfectly normal movement to me, When it reaches the set point and the valve feedback cuts off the valve then the...
-
RAlright folks, finally got my "little mule" running well this past Saturday. I was contemplating taking all the rear sheet metal off and...
-
RRussell King replied to the thread L185 Headlamp wire harness / headlamp assembly.Contact @007kubotaguy or just call his salvage yard shown below. He may be able to help with that part or a harness.
-
-
RRussell King replied to the thread Debating purchase of a used BX2830 snowblower.Oh sorry for the confusion on my end! Living in Central Texas, I have zero experience with a snow blower and even less knowledge about...
-
RRussell King replied to the thread Debating purchase of a used BX2830 snowblower.What else can you use a tractor for? You will be able to do a lot of work with a tractor that you would normally ignore. If it has a...
