Russell King's latest activity
-
RAre you making sure the pull out screen in front of the radiator is clean? If they clog up it blocks the air for the radiator and it...
-
RRussell King replied to the thread G6200 midmount mower deck removal.There is probably also an operation manual for the mower deck. I have never looked a Kubota books dot com for mower deck information...
-
RJust downloaded the workshop manual PDF. I found the info on removing the deck in there--thank you very much.
-
RRussell King replied to the thread G6200 midmount mower deck removal.Look for an owner’s manual at Kubota books dot com
-
RRussell King replied to the thread Belly mount GF1800E went bang, then smoke.@rag Please take some pictures of the lower sides of the engine and of the damage of the radiator and post them here. I don’t see any...
-
ROkay I’ll have to scrape that up and see what it is but I was thinking that was all just chunks of grease as that’s what it looked and...
-
RRussell King replied to the thread M7950DT clutch won’t disengage.This is the area I was talking about (inside the circle). The area with bolts is just grease/dirt.
-
-
RI’d have to double check but don’t think there was any grease back in that area. That’s a mouse nest back in there made from black wool...
-
RRussell King replied to the thread M7950DT clutch won’t disengage.Oh now I see what you are talking about. I was wondering why the center area looks “bad” but that may be grease? In this picture is...
-
-
RRussell King replied to the thread M7950DT clutch won’t disengage.Do you have an idea of how that happened?
-
RRussell King replied to the thread Belly mount GF1800E went bang, then smoke.When you are posting you attach the picture to the post. at the top of the screen near the middle of the screen is something that looks...
-
RThanks, that worked great.
-
RRussell King replied to the thread M5400 won't start, have changed most everything.In theory yes it is. In reality the starter may need to be removed and the area buffed to remove rust. Then at the tractor end of the...
-
RRussell King reacted to Sobrbiker's post in the thread L2850/BF500 Pressure test question with
Like.
Thanks Russell, I did peek at that thread and appreciate the response. The L2850 position control adjustment is a little different (or... -
RThe two speed Whites I’ve dealt with (very little) work like this: Not swearing that’s how the 2-105 works. I think the guy in the...
