Russell King's latest activity
-
RRussell King replied to the thread New L3902 - 17h - Lost all hydraulics.Could you or the dealer cut the filter open and see what was clogging it up?
-
RRussell. Yeah I located it directly behind the alternator. You will have to remove it to see the plug. If you see oil weeping around the...
-
RPump located! Thanks for the link, Russell. Lance was very helpful and had some very good advice, as well as having the pump and at a...
-
RRussell King replied to the thread Kubota L2501DT PTO won't engage.On the adjuster, on end is normal right hand threads and the other end is left hand threads like a turnbuckle. You may have to hold the...
-
RRussell King replied to the thread Kubota L2501DT PTO won't engage.On the right lift arm there should be a lock nut of some sort. You must loosen the lock nut before trying to adjust the position. Be...
-
RHere's a link to our album of B5100 pictures, taken over the last 10 years. https://photos.app.goo.gl/hk1nJCWyZ7EzguYdA There are...
-
RRussell King replied to the thread Oil gushing out suddenly.@OldL185 The plug in the service bulletin is near the oil filter. On my L185 the alternator is on the opposite side of the engine...
-
RRussell King replied to the thread Oil gushing out suddenly.Thank you!
-
RRussell King replied to the thread B8200 no hydraulics.@TheOldHokie I have a question about that directional valve that may help… Is the valve screwed into the case to some particular extent...
-
RRussell King replied to the thread L345DT Hydraulic Pump Wanted.Try this salvage yard near the San Francisco area According to Messicks the pump is only used on the L345 model! And is really...
-
-
RRussell King reacted to TheOldHokie's post in the thread B6100 front loader hydraulic pump with
Like.
In this case you are looking at maybe 10 HP max and depending on the pump likely half that. Tractors have used crankshaft pulley bolts... -
RHarder than you think. Screenshot, then it's too big to upload, then I have to convert to a lower resolution format. But I did it...
-
RRussell King replied to the thread hydraulic line repair ..No
-
RRussell King replied to the thread B6100 front loader hydraulic pump.@TheOldHokie Looking at the drawing you had made in the other post, I see the torque into the shaft (from the tractor) is through the...
-
RRussell King replied to the thread Stabilizer on my L4802.You should try a better rust penetrating oil than WD-40! Try PB Blaster, 3 in 1, Kroil, Mouse Milk or something similar. I think you...
