Runs With Scissors's latest activity
-
When I started out in machining, the shop got low on work, so a toolmaker was assigned to try and remedy the non-Kurt style vises, and... -
Had a cheap owner buy a couple cheap vises -- half the cost of a Kurt vise. Inspection detailed lack of flat surfaces, 90 deg surfaces...
-
Congrats on the new mill. You did great on the cutters, looks like a good variety, assuming they are not dull beyond use. (close one, I...
-
Here's a tubalcain vid on Kurt mill vises. The two pictured above LOOK like Kurt. I was once told by a Kurt rep that all Kurt vises...
-
Runs With Scissors replied to the thread Name that Tool.Wow guys! I have learned more about vises in the last 30 minutes than I have in the past 50+ years. So apparantly it’s true that even...
-
-
Runs With Scissors replied to the thread Name that Tool.What “type” of vise(s) did I buy? Here are close up’s of the “non-BP” one's that I got. I do know that the Kurt’s usually...
-
-
Good morning. Mr Hodge, this to really not my place, as I don’t know you or your products in first person, but I have had some...
-
I too wasn't sure if it would work or if the bars would move, but they stayed in place enough to get a 90 degree bend.
-
Runs With Scissors replied to the thread Name that Tool.Oh…..and who the hell needs 4 damn vise's So after I “won” the Bridgeport, I decided/reasoned/figured that since I am going to have to...
-
-
Runs With Scissors replied to the thread Name that Tool.Oh, my friend, that observation is of paramount importance. (I do find it ironic/strange/curious/puzzling that people focus on the...
-
-
Runs With Scissors reacted to imarobot's post in the thread Rear tire fill - your thoughts appreciated with
Haha.
I'll add this to my list of what to not ask about along with oil, filters, transmission fluid, grease ... I'm sure I'm missing a few... -
Runs With Scissors reacted to MapleLeafFarmer's post in the thread Rear tire fill - your thoughts appreciated with Haha.
this got a smile out of me this morning and my mind went squirrelly to a new Jeopardy question.... what stinks and stains your shop...
-
Runs With Scissors reacted to WI_Hedgehog's post in the thread Dropping an implement with engine off with Haha.
I believe that to be true in your case. :ROFLMAO:
-
Runs With Scissors replied to the thread DIY press brake.Good idea. I would have thought that those 1” bars would have “moved” when the force was applied. I will have to try this trick on my...
-
So true. I entered an online farm auction and bid on three hay wagons and an old antique horse dran wagon. Bid quite losw and figured...
