Runs With Scissors's latest activity
-
Runs With Scissors reacted to Bee-Positive's post in the thread Kubota L3800 tractor/ backhoe fuel guage, temp & tach not working with
Like.
:ROFLMAO: I do that all the time, especially when my 3 year old grandson is "HEPLING"!!! I've learned to take pictures before I... -
Runs With Scissors reacted to GrumpyFarmer's post in the thread Dropping an implement with engine off with Like.
I’m not sure this needs said or not…I am not the safety police, but I don’t want any of us or our loved ones hurt(so I think no harm to...
-
My name is William, but I didn't think my bad welds were that well known.
-
Runs With Scissors replied to the thread How to measure fluid level.For 20 bucks, just get the "JD red dye" and be done with it. I would add that, I agree with @old and tired that you only need a small...
-
NWS also predicted this was going to be the worst hurricane on record. If anyone could be accurate with predictions, they should go to...
-
The year you don’t get it, is the year you’ll get 69” of snow and then all you can do is shake your head. Decision, decisions…good luck...
-
Runs With Scissors replied to the thread I own a 2021 L2501..I can get something similar on mine when I am “digging” with the bucket. However, I will say this, I am probably “overloading it” when...
-
Runs With Scissors replied to the thread Rust on weld of new bucket.Each person has different circumstances. I personally wouldn’t worry about it, but I have a welder, and could take care of it, IF...
-
Runs With Scissors reacted to TheOldHokie's post in the thread Rust on weld of new bucket with Haha.
-
Runs With Scissors reacted to TheOldHokie's post in the thread Rust on weld of new bucket with Like.
Personally I would ask the dealer to do that. Or more likely I would just ignore it. 🙄 Dan
-
Runs With Scissors replied to the thread Laser engraver.Damn boats!!!!! Guess I will see you at the next "Coast Guard Boater Safety" meeting.. ;)
-
Runs With Scissors replied to the thread Front loader for a B7200.No I was referring to the black part. Thats the part I beveled by “eye”. The orange part is the "factory bucket" In regard to your...
-
Runs With Scissors replied to the thread Front loader for a B7200.Mine come down to a point. If I were to guess, i would say the angle is about 55-65 degrees from horizontal.
-
-
Runs With Scissors reacted to GrumpyFarmer's post in the thread Back blade / landscape rake advice with Like.
Thank you. 👍 That’s a funnel to the intake on the flex capacitor 😉 Not it’s not part of the rake assembly…I picked up a spreader too...
-
Runs With Scissors replied to the thread Back blade / landscape rake advice.Congratulations sir🍻(y) That looks like a great rake! I especially like the "hydraulic tilt”. Is that big yellow cone a part of it...
