Runs With Scissors's latest activity
-
Runs With Scissors replied to the thread Front loader for a B7200.At first glance, I am not particularly fond of those "internal ribs”, but I can’t articulate why I don’t like them…..I just don’t for... -
Runs With Scissors replied to the thread SSQA pallet forks.I agree that forks are a “game changer” for sure. Now it’s ‘fun’ to unload the truck/trailer, or move things around. ;) BTW nice job...
-
Absolutely. I think I'll wear them out before the bucket (that's still coming). But I do have the steel for the bucket now, so that's...
-
Runs With Scissors reacted to Russell King's post in the thread Looking for “Black pipe dope” advice………... with
Like.
Not related to the question you asked but… You may not be turning the pipe fittings the proper number of turns. See these charts but... -
Runs With Scissors replied to the thread Looking for “Black pipe dope” advice………....Thanks for all the replies guys! (y) It appears that “Rectumseal" has the market pretty well cornered on sealing solutions. I decided...
-
Runs With Scissors reacted to imarobot's post in the thread How to Jam New Seal on L3170 Front Axle? with Haha.
And then there is the machine screw. What gender would this be?
-
Runs With Scissors replied to the thread L2501 intermittent loss of power and sputtering.OK, so now you have “verification” from “trained professionals”……. I know it sounds stupid, and I am "grabbing at straws’ but was the...
-
Well I plumbed my plasma cutter for air when I first got it, and well……it worked. But the “black pipe connections” pipes leak a...
-
-
Runs With Scissors reacted to WI_Hedgehog's post in the thread How to Jam New Seal on L3170 Front Axle? with Haha.
You've strayed from bolts and screws to "nuts." :ROFLMAO:
-
Runs With Scissors replied to the thread L2501 intermittent loss of power and sputtering.Ok, well you are beginning to narrow it down. If it began at ~40 hours, it should not be related to a 50 hour service “mistake". And...
-
Runs With Scissors reacted to Rover78's post in the thread L2501 intermittent loss of power and sputtering with Like.
I have not been able to nail down a common theme of what I am doing at the time I initially thought fully warm under load. I have since...
-
Now try it with a test light. Voltmeters are great. But they only measure voltage. A poor connection can have good voltage, but not...
-
Runs With Scissors replied to the thread How to Jam New Seal on L3170 Front Axle?.Bolt Screw…. Now, the real question…….Since I am not a “Biologist” ;) …...Male or Female????
-
-
Runs With Scissors replied to the thread DIY press brake.My little "SWAG” press brake uses 2 springs (one on each side) to “return up" Looks like a lot of cutting with an angle grinder. I...
-
