Roger Fowler's latest activity
-
RRoger Fowler replied to the thread Mowing Question G1800S.Finally got it! I set both anti-scalp wheels on 3/4" blocks then adjusted both front links as tight as I could. Only took a little...
-
RRoger Fowler replied to the thread Mowing Question G1800S.Couple of silly questions: 1) How do you support the MMM so you can attach the front links? 2) How do you pull the MMM forward to take...
-
RRoger Fowler replied to the thread Mowing Question G1800S.Wow!!! What a PITA this set-up is!! I have the front links down to 375 mm and the anti-scalp rollers are still on the ground...
-
RRoger Fowler replied to the thread Mowing Question G1800S.I mis-spoke in my previous post. Yes, the parts catalog and service manual refers to them as anti-scalp wheels. And the picture looks...
-
RRoger Fowler replied to the thread Mowing Question G1800S.I was reading on the Internet and someone mentioned that the front gauge wheels should not touch the ground. I cannot see that...
-
RRoger Fowler posted the thread Disconnect Combination box connector - G1800 in Service, Repair & Maintenance.OK, I'm being lazy - I don't want to remove the foot rests on my machine. Any pointers on disconnecting the connector on the...
-
RRoger Fowler replied to the thread Mowing Question G1800S.Finally got back to this.... Tire pressures are good. I adjusted one of the front links so they are the same. And measured deck...
-
RThis is my second season mowing with the G1800S. The left front anti-scalp roller often plows up soft turf or dirt with no grass...