Redcorn's latest activity
-
RRedcorn replied to the thread PTO works, then fails on 2010 L3200HST.The WSM says the holding coil should be at 15.6 ohms. Mine is 15.8. It says the pulling coil should be at 0.375. Mine is at 0.6...
-
RRedcorn replied to the thread PTO works, then fails on 2010 L3200HST.Thanks, Jason. I've used the WSM, my multimeter, and the advice provided here to the best of my ability. I've also used AI, at least to...
-
RRedcorn replied to the thread PTO works, then fails on 2010 L3200HST.I agree. I'm almost there, but loading the tractor, driving 70 miles round trip, and paying dealer labor rates MIGHT be saved by a...
-
RRedcorn replied to the thread PTO works, then fails on 2010 L3200HST.Appreciate the input. Replaced both PTO safety switches this morning with new. No difference in tractor behavior. Start, run, move PTO...
-
RRedcorn replied to the thread PTO works, then fails on 2010 L3200HST.Picking up two switches this morning and Installing. Will report. I don't go to the casino. Instead I just replace parts before I'm...
-
RRedcorn replied to the thread PTO works, then fails on 2010 L3200HST.Asking for clarification. When I'm operating the auger, the tractor is stationary. The tractor is dying while stationary, when the PTO...
-
RRedcorn replied to the thread PTO works, then fails on 2010 L3200HST.After looking at the wiring diagram, there are two circuits served by the tandem switches. Likely part of the OPC system. It makes sense...
-
RRedcorn replied to the thread PTO works, then fails on 2010 L3200HST.Thank you. I have one more thing to add that may help, discovered while checking on how your suggestion would work. On the 3200 HST...
-
RI recently posted a problem with the tractor starting fine, but dying once I pressed the pedal forward or back. Got good advice (new...
-
RRedcorn replied to the thread L3200HST issues - Neutral Safety Switch?.Many thanks to North Idaho Wolfman and chim. It's fixed. I now have a better idea of how the system works. I ordered a new seat switch...
-
RRedcorn replied to the thread L3200HST issues - Neutral Safety Switch?.OK. I can't find anything online to test the operation of the seat switch with a multimeter, so I'm ordering the seat switch from...
-
RRedcorn replied to the thread L3200HST issues - Neutral Safety Switch?.Thanks, I read something similar. I have a multitester, but have yet to see a diagram of which poles to test. I agree that with the...
-
RRedcorn replied to the thread L3200HST issues - Neutral Safety Switch?.Yes, I downloaded it yesterday. The one I downloaded doesn't look to address the proper depth for the neutral safety switch for the HST...
-
RRedcorn posted the thread L3200HST issues - Neutral Safety Switch? in Service, Repair & Maintenance.First time posting - thanks in advance for any advice. Have a 2010 L3200 with a little over 500 hours on it. Bought it new. Machine was...