Rdrcr's latest activity

  • R
    sounds like it was just stored outside on the lot to me. Don't sweat it, just enjoy it.
  • R
    I have a L3302 and I will spin the implement by using a steel bar in the U-joint to line up the splines. The PTO shaft cannot be rotated...
  • R
    Rdrcr reacted to jhetcel23's post in the thread L3902 vs L3560 Implements with Like Like.
    Thanks all for the insight and the pictures! Have decided to go with the L3560, but won't be until next spring.
  • R
    Rdrcr reacted to jimh406's post in the thread L3902 vs L3560 Implements with Like Like.
    The 5 HP rule is just an approximation. It depends on how fast, how low, and how often you want to mow. Fwiw, I have a 72 that I use...
  • R
    Rdrcr reacted to North Idaho Wolfman's post in the thread L3902 vs L3560 Implements with Like Like.
    The L3560 is hands down a much better tractor than the L3902! There is only 3 PTO HP difference, you'll never notice the difference.
  • R
    Rdrcr reacted to bootlegfab's post in the thread Turning the pumps up! with Like Like.
    I bought the BX kit with gauge and shims. Mainly to see if I was within factory spec or just below. I was 75psi below spec so a .2 shim...
  • R
    Rdrcr replied to the thread Turning the pumps up!.
    BXpanded sells a shim kit to increase the loader hydraulic pressure. I’m not sure if it applies to your tractor model but, I believe...
  • R
    Rdrcr reacted to WI_Hedgehog's post in the thread Down-Hill In A Hurry with Like Like.
    This Memorial weekend I was farming rocks, and while they do move on their own, some needed a bit of help getting from Point A to Point...
  • R
    Rdrcr reacted to JenniferKubotaM62's post in the thread What is Messick's Smoking with Like Like.
    Thanks Dan, great feedback, appreciate the comments and don’t disagree at all… it does freeze here but I don’t work in it… lol. Jen
  • R
    Rdrcr reacted to JeremyBX2200's post in the thread L vs LX with Like Like.
    Yes, EGTs are a factor and even more of one on a NA diesel. I drove a NA IDI Ford for a lot of miles and added an EGT probe to keep an...
  • R
    Rdrcr reacted to PaulL's post in the thread L vs LX with Like Like.
    Yes and no. The block/displacement, yes. Not certain it has all the same internals, it's different than those high HP engines in having...
  • R
    Rdrcr replied to the thread L vs LX.
    The L2501’s D1703 is manufactured for a variety of applications and power output varies based on regulations for its use. In the L2501...
  • R
    Rdrcr reacted to JeremyBX2200's post in the thread L vs LX with Like Like.
    The plan would be to pay cash for a used one. As far as durability at higher HP, from what I have read it appears that the L2501s...
  • R
    Rdrcr reacted to PaulL's post in the thread L vs LX with Like Like.
    Grand-L is not the same thing as standard L, as you know. It seems the OP is looking at the L mostly because it's the same price as the...
  • R
    Rdrcr replied to the thread L4240HSTC-3 Turbo upfit-upgrade?.
    We’re expecting the same, or perhaps a bit more power from the L3240. The L3240’s D1703 engine is spec’d to Tier 2 emissions (compared...