Quality Dirt Works's latest activity
-
QQuality Dirt Works replied to the thread Kx040-4 excavator engine code PO 193 won’t go away.Let me clarify, we originally had a code 19 that wouldn’t it go away so I took it to a Kubata dealer and they said they fixed it...
-
QQuality Dirt Works replied to the thread Kx040-4 excavator engine code PO 193 won’t go away.Well, you wouldn’t believe what I went through with this excavator the wiring basically chewed itself up in the engine compartment...
-
QQuality Dirt Works replied to the thread Kx040-4 excavator engine code PO 193 won’t go away.(MOD EDIT: removed extremely rude posting)
-
QQuality Dirt Works replied to the thread Kx040-4 excavator engine code PO 193 won’t go away.Because it is not giving the correct signal voltage and the code comes on soon as I turn the Keyon if you have any suggestions please...
-
QQuality Dirt Works replied to the thread Kx040-4 excavator engine code PO 193 won’t go away.Yes I just got done checking everything again i even ran new wires externally from the sensor to the PCM and didn’t seem to help any...
-
QQuality Dirt Works replied to the thread Kx040-4 excavator engine code PO 193 won’t go away.
-
QQuality Dirt Works replied to the thread Kx040-4 excavator engine code PO 193 won’t go away.Which that’s why I think it might be that terminal is not putting out what it’s supposed to be from the ECU. I had it repaired from a...
-
QQuality Dirt Works replied to the thread Kx040-4 excavator engine code PO 193 won’t go away.not a typo that is the reading .32 volts I checked continuity yesterday and the wire which is yellow in this case from the ECU harness...
-
QQuality Dirt Works replied to the thread Kx040-4 excavator engine code PO 193 won’t go away.I did all that and My sensor voltage is .32 volts and 5 volts on feed wire and good ground with ohm meter also replaced sensor and still...
-
QQuality Dirt Works posted the thread Kx040-4 excavator engine code PO 193 won’t go away in Service, Repair & Maintenance.I need some help. I have this KXO 40–4 excavator has a PO 193 code that won’t go away after I fixed all the wiring problems and replace...