PoTreeBoy's latest activity
-
PPoTreeBoy replied to the thread Bent Wheel Yoke on RCR1860.I managed to straighten mine with a big propane torch and 36" (48"?) wrench, but an oxy/acetylene torch would work much better.
-
PPoTreeBoy reacted to BBFarmer's post in the thread Photo shoot anything lately? Random Photo Thread with
Like.
Yea, they're a biggin'. Where we do have several hundred bushes spread over a few acres, the majority large scale u picks will plant... -
PPoTreeBoy replied to the thread M105c wet clutch?.There's no actual clutch in there, just a damper disk. I'd keep an eye on it. There may also be coolant freeze plugs in there that could...
-
PPoTreeBoy replied to the thread Photo shoot anything lately? Random Photo Thread.I rechecked, it was Bounds in Wiggins.
-
PPoTreeBoy replied to the thread Photo shoot anything lately? Random Photo Thread.There's an article in the latest Farm Bureau magazine about a bb operation down there somewhere. Not you?
-
PPoTreeBoy replied to the thread Initial purchase list vs "wish list".I'll comment on just a few. * Get a 72" medium duty cutter RCR1872 if LandPride * True 3rd function. The FEL valves have special...
-
PAll good advice. Lincoln, Miller and Hobart are the usual suspects for the Home Shop welder. I'll just add one thing: MIG welding...
-
PPoTreeBoy replied to the thread Newbie questions.You come here without giving us a chance to tell you what tractor you need? JK An MX should be a good utility tractor. 1500 hours...
-
PPoTreeBoy replied to the thread Dipping toes in the world of Welding.That looks good. I have a yeswelder MIG205, which is similar. It is synergetic, which I haven't found to be real useful. Arccaptain...
-
PPoTreeBoy replied to the thread HST pressure tester?.I couldn't understand all you said, but I think you had it in high range, pushed the pedal, and it barely tried to move. The PTO...
-
PPoTreeBoy replied to the thread How to check hydraulic fluid on L2800.You should be in the habit of lowering the loader and any implement on the 3ph anytime you shut down the tractor. This is the same state...
-
PAldi's shopping carts are great for firewood and a real bargain at 25 cents each. 🤑
-
PPoTreeBoy replied to the thread Dipping toes in the world of Welding.Try to find a local class for farmers, hobbyist, DIY etc. A little hands on assistance really helps get started.
-
PCould be there is an internal charge pump fed by the PS return. HSTs are not my strength and I dont know the details of how Kubota...
-
PPoTreeBoy replied to the thread HST pressure tester?.We may have a misunderstanding. By 'stall' I don't mean the engine stalls. I mean the wheels quit pulling. With the brakes pressed...