Recent content by PenderBen

Makes sense, I’ll just drain and replace what I can. Thanks

Hi all. I searched before posting this and couldn’t find anything. I’m getting ready to change the transmission fluid in my b6200d. This system is shared with the FEL hydraulics, is there any special trick to getting as much fluid out of the hydraulic system of the FEL when I drain it, or do...

I have a harbor freight compression tester, but none of the adapters fit this engine. My main lack of available tools is that I’m on a small island, and most places on the big island are closed because of covid. I’ll see if anyone local has a coolant system tester, that is a possibility.

Thanks for the feedback, I have ordered a head gasket, in the mean time I will try re-torquing the head bolts.

Bumping this, still looking for help. I have now found what appears to be oil in the coolant, but no (apparent) coolant in the oil. I sucked some coolant out of the radiator and let it settle in a clear vessel for a day, and it was about 2/3 sludgy black (on top), 1/3 nice green coolant (on the...

To access them on my B6200, below the headlight switches, they can be pulled down a bit and hang below the dash on the left. I don***8217;t know if my wiring has ever been altered, it doesn***8217;t look like it.

Does it leave the pool of oil after just sitting, or while running (or both). I know my B6200d leaves a nice little oil pool when I run stationary equipment for a bit (such as a chipper), but it***8217;s coming from the breather and blow by.

Hello everyone. I’m having a strange problem with the engine in my T1600H, which I believe is a z482. I have found a few posts here and elsewhere on the internet of people having the same problem with the same engine and other Kubota engines, but never any solutions or follow up. I have not...

Digging up an old thread here looking for advice- I might end up starting a new thread, but I***8217;ll start here. I am having the same problem in my T1600H, which I believe is a z482 engine, except it happens pretty quickly, not after an hour or so like the OP. I have not had it long, before...

The B6200 battery is under the hood at the front, just behind the grill and under the air filter. I believe there may be a bit more room to work with, but I’ll measure and see. When I do get a new one I’ll report back if I can fit anything larger. I recently had the whole front end apart and...

Good to consider, I may measure the battery area and see if there’s room for improvement. When my battery was decent it was slow to warm the glow plugs up, even in warm weather, since I’ve had to jump it a few times now, in freezing weather, I noticed using a portable 150amp jumper they heat up...

Thanks! .

Hello everyone. The battery in my B6200D is about done for, so I’ll be replacing it soon. I have no idea if what’s in there is the proper battery or not, it was in there when I got it. Can anyone tell me what the right battery for this model is? CA/CCA rating, etc? Pretty good chance I’ll pick...

Oh, good point, I’ll have to look into that. Thanks

Darn, that***8217;s kinda what I thought. Not sure I know anyone who would accept a shipment that big for me :-) Thanks Wolfman.