PaulL's latest activity

  • P
    PaulL replied to the thread Considering a L5030 HSTC.
    I think this is the bit that has people confused. I think in your use, you coast around the turn. So you clutch coming into the turn...
  • P
    PaulL replied to the thread TG1860.
    If you have time and space, why not. Other people would drop $3K on a set of golf clubs. To be fair, a set of golf clubs will take up...
  • P
    PaulL reacted to jcross312's post in the thread TG1860 with Like Like.
    Good point. Not sure why I want it exactly. It would be a good backup for my big mower and could use it in tighter spots. May be more of...
  • P
    PaulL replied to the thread Considering a L5030 HSTC.
    Nobody said you were lying, you're reading a bit too much into a comment someone probably typed in 30 seconds on a mobile phone on the...
  • P
    PaulL replied to the thread TG1860.
    https://www.tractordata.com/lawn-tractors/000/3/8/386-kubota-tg1860.html It is in fact diesel, so long as it's not the G model. Hard...
  • P
    No, I believe he's talking about the anti-scalp wheels. In that photo you can see anti-scalp wheels on the rear of the deck ( just in...
  • P
    When you look at the deck it has anti-scalp wheels on each corner of the deck. The front ones are entirely missing - someone's taken...
  • P
    PaulL replied to the thread Considering a L5030 HSTC.
    Or put some duct tape over it. I know, I'm not even a farmer.......
  • P
    PaulL replied to the thread Considering a L5030 HSTC.
    One of the two buttons is labelled "travel speed". May be some sort of cruise control on it. Can you tell the dealer you're interested...
  • P
    You don't have to buy SUDT2, and it's not unreasonably priced for a synthetic hydraulic oil. If your climate isn't all that cold (i.e...
  • P
    PaulL replied to the thread Questions about a 2016 L3901 HST.
    Agree. It was the B3350 that had a unique emissions system that was supposed to be cheaper, but turned out to just be worse. Some people...
  • P
    PaulL replied to the thread How much is my Kubota worth?.
    Interim tier IV, depending on size, may have meant "we allow you to still make this even though it doesn't actually hit the emissions...
  • P
    PaulL replied to the thread Considering a L5030 HSTC.
    Dad had a big Ford 2WD that he used to cut paddocks with. He swapped to a smaller 4WD Kubota that he reckoned was just as capable, but...
  • P
    PaulL replied to the thread First Time Buyer MX4700.
    A 2wd will work fine. It's a good size machine, and an FEL is a step up from no FEL. People have had 2wd tractors for years, yes there...
  • P
    Are you sure the hour meter isn't working? It wouldn't move much in a short run. Did it work at all when you mowed today?