Paul Allwood's latest activity
-
The steering box on a B7200 is simply not adequate for loader use. I had to replace mine twice. Electric PS wont help or hurt that BUT... -
Now that I've driven the tractor (B7200HSTD) with the loader attached I've noticed a pretty decent increase in steering effort. And...
-
I have all of the OEM manuals in original hard copy. The ones for the loader are short and easily scanned. The WSM for the tractor not...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Hugo. I agree - just haven't needed it yet.
-
Hi Paul, in my humble opinion the work shop manual is a must if you want to do work on the tractor yourself. And you don't seem like a...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Dan. I have a 3500 psi gauge, currently connected to the spare inlet port on the loader valve. I'll need some different fittings...
-
That whole assembly is referred to as the hydraulic outlet block. The right port is pump pressure OUT to the implenent and the left one...
-
Yes but. Kubota has a professionally engineered and published specification of 600 pounds at the pins on a B1630 loader. The...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Hugo. Haven't been able to find any front axle load rating data in the operators manual. I don't have a workshop manual.
-
Hi Paul, I think (meaning I do not know for sure) the front axle load is the limiting factor. With the hydraulic cylinders and the...
-
Paul Allwood replied to the thread Front loader for a B7200.Many thanks yet again Dan. When you say outlet block, are you referring to the right hand port labelled 3 in the attached pic ? With a...
-
-
The raw lift caoacity of the the loader is limited by the geometry and strength of the frame, the number and size of the hydraulic...
-
Paul Allwood replied to the thread Front loader for a B7200.What limits loader lift capacity ? Let's start with sufficient ballast and flat ground....I'm interested in what limits the lift...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Dan. I was never a welder or fabricator by profession, so for me, even making things that I could buy is challenge enough.
-
I understand and share that feeling and I admire and applaud your loader project. But personally, at this stage of my life replicating...
