Paul Allwood's latest activity
-
I bought this ~1978 Powermatic drill press on craigslist (a disused tool room item from a local manufacturing company). They had mounted... -
Got the square U bolts today and permanently mounted the rack. Hopefully, it will work for the tools and other things that I need to...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Chim
-
Beautiful! I'm sure many others here also enjoy tracking your progress.
-
Paul Allwood replied to the thread Front loader for a B7200.A little more progress After getting the geometry where I think I want it, I've made a SSQA receiver for the front of the loader. I...
-
-
Paul Allwood replied to the thread Front loader for a B7200.With the original geometry that was based on plywood and cardboard models, I ended up with a total bucket rotation of 110 degrees with...
-
-
Paul Allwood reacted to airbiscuit's post in the thread Vevor hydraulic steering unit for B series? with
Like.
Use the electric steering from a Saturn Vue -
Paul Allwood reacted to North Idaho Wolfman's post in the thread Front loader for a B7200 with Like.
-
Paul Allwood replied to the thread Front loader for a B7200.It's 2.5" bore x 8" stroke. This model of cylinder does use an internal stop, without it it's the same as a 10" stroke cylinder. I can...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Hugo.
-
Hello Paul, I use Visio (or LibreDraw) for planning geometries. Not as powerful as Solidworks but faster than making cardboard or...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks Paul. You're right, I'll probably make the implements I'm going to use initially, at least for now. I hadn't considered the older...
-
If you haven't made your SSQA yet, you could consider instead doing the older proprietary Kubota quick attach. I only say this since it...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks for your comments. I reckon if it works for Kubota, maybe it can work for me too. PS - it's the same 2.5" x 8" dump cylinder...
-
Paul Allwood reacted to North Idaho Wolfman's post in the thread Front loader for a B7200 with Like.
Yea your geometry is off. Your not getting enough roll back or enough roll over. This could be caused by bracket location or simply by...
