Paul Allwood's latest activity
-
He builds pretty stout so bending is probably not a concern. My thoughts were more bounce and harder to control. He will know more once... -
Paul Allwood replied to the thread Front loader for a B7200.Thanks for the comments. You're right about the location of the bending force on the arms. Hopefully I've reinforced it enough - I guess...
-
Very nice. I also bought 2" diameter cylinders because they were on sale when I built mine. However, I bought 16" stroke ones. I think...
-
Paul Allwood replied to the thread Front loader for a B7200.A bit more progress on the loader over the last few days, mostly on the arms. It doesn't seem to matter how hard I try to make things...
-
-
Very nice work! I'm not sure bracing the tops of the towers is necessary -- you have them very well braced at the bottom. They do look...
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks - I like your description of aging.
-
One other thing to consider is to give yourself something that helps you get onto the tractor (besides the steering wheel). That may...
-
Paul Allwood replied to the thread Front loader for a B7200.There is more to come. What you can see so far is the support frame that stays attached to the tractor. There are posts that fit into...
-
-
Paul Allwood replied to the thread Front loader for a B7200.Thanks mate
-
Paul Allwood replied to the thread Front loader for a B7200.Today I got the loader sub-frame bolted in place. Still planning to add a brace across the top between the two towers - need to sit and...
-
-
Paul Allwood replied to the thread Front loader for a B7200.Nice job, looks great.
-
-
Paul Allwood replied to the thread Front loader for a B7200.Don't know if it's "Kubota Orange", but it's close enough for me.
-
-
Paul Allwood replied to the thread Front loader for a B7200.The power was out for most of the day here yesterday so it was a good day for painting all of the loader sub-frame components. First...
-
-
Paul Allwood replied to the thread Exhaust modification.You're right. Based on lots of photos I've seen of other's who have done the same thing, my guess is that it might actually be ok. But...
