Recent content by Ollie1650

Find a serial number for a BX2360 and tell the dealer you need all of the fender and hood parts for that BX2360. BX2370 or BX2670 will work except for the floor pan. This will give you a long lasting hood, fenders, and floor pan.

K2651-54040 under bonnet

I have a BX2350 that lived outdoors it's whole life. The Plastic was shot. I found mostly used parts. (BX2670 with bullet hole in it, and so on.) I replaced the fenders with BX2370 fenders. BX2360, BX2660, BX2370 or BX2670 work great! Same for the hood or "Bonnet", but I had to buy a mounting...

None of the "Tin work" from a bx2380 will work on a 50, 60, or 70 series. All of the parts from a BX2360, early serial numbers, will fit on a BX2350. You must buy the new hinge bracket for the hood.

On my BX2350. I replaced the floor pan with one from a BX2360. All of the other plastic parts are from a BX2370. Most of the parts can off of tractors that were dented slightly. But you could walk into the dealer and order everything you need for a BX2360. Serial number 52055. You will need to...

I declare that you are now working on a bx2360 serial number 52055. Now go buy what you need. My parts guy is actually helpful. Too bad your's wants you to buy a BX2680 instead of bothering him. You can now order from messicks.

Yes, but it is more like rubber than the hood.

Even though you have a BX2350. Just go to the Kubota dealer and tell them that you need to replace the fender on your BX2370. The only part that won't fit is the floor. It needs to be for a BX2360. The BX2350 is the same "Tin" work as the BX2360. The BX2350 parts are not worth buying or fixing...

The BX2350 is the same "Tin" work as the BX2360. The BX2350 parts are not worth buying or fixing. Go find or purchase the Hood (Bonnet) from a BX2360,BX2370,BX2660, or BX2670 they will all fit. You must use the new mounting bracket that came with the newer hood. Head lights are the same. I had...

I bought the lower Bonnet for a BX2370 for my BX2350 fit just fine. $260 from dealer.

The BX2350 is the same "Tin" work as the BX2360. The BX2350 parts are not worth buying or fixing. Go find or purchase the Hood (Bonnet) from a BX2360,BX2370,BX2660, or BX2670 they will all fit. You must use the new mounting bracket that came with the newer hood. Head lights are the same. I had...

Yes someone has taken it apart and either repaired it or just resealed it. Just make sure that all of the levers detent properly, that it operates correctly. BTW Plastic parts will all break, the lower bonnet has been replaced.

The BX2350 is the same "Tin" work as the BX2360. T he BX2350 parts are not worth buying or fixing. Go find or purchase the Hood (Bonnet) from a BX2360,BX2370,BX2660, or BX2670 they will all fit. You must use the new mounting bracket that came with the newer hood. Head lights are the same. I had...