Old Machinist's latest activity
-
Old Machinist replied to the thread Repairing sanding belts.I tried gluing some small belts together with no success. -
Old Machinist reacted to S-G-R's post in the thread Who sells good replacement seat covers for UTVs? with
Like.
I'd say your best bet would be to try a upholstery shop. -
Old Machinist reacted to Russell King's post in the thread 2018 m5-111 lost engine power now wont start with Like.
See if the air filter is clogged with dust. See if there is a screen in front of the radiator that is covered with hay and pollen that...
-
Old Machinist replied to the thread 2018 m5-111 lost engine power now wont start.Sounds like typical fuel starvation. Make sure the fuel shutoff solenoid is opening.
-
Old Machinist reacted to jyoutz's post in the thread Cab glass protection from trimming limbs with Like.
How about some kind of shield on the mower, not the glass?
-
Old Machinist replied to the thread Tractor for Municipal Easement Work.The John Deere 4044M would be in that price range.
-
Old Machinist replied to the thread Operator seat weight maximum.Does it have room under the seat for this Air Shim?
-
Got it turned around, not a bad job but glad my hands aren't any larger . More air flowing over the engine now.
-
Old Machinist replied to the thread Fan installed backward.If it rotates counterclockwise it is indeed mounted reversed.
-
Thats what the pro’s call “plumbing diversification”. ;)
-
Old Machinist replied to the thread LX3310 Cab PTO Switch sticking when hot.I looked again and I can get eyes on it from the back. I probably won't be able to get my hands on it without removing the mower deck at...
-
Old Machinist replied to the thread LX3310 Cab PTO Switch sticking when hot.The manual says it's a switch. The PTO engages and disengages fine. The safety switch isn't closing when I disengage the PTO so it...
-
-
Old Machinist posted the thread LX3310 Cab PTO Switch sticking when hot in Service, Repair & Maintenance.The last couple of times I have mowed when I disengage the PTO and get out the engine shuts off as if the PTO is still engaged. It won't...
-
Old Machinist replied to the thread Get rid of yellow jacket nest above ground?.Also look at the videos on collecting them with a shop vac with some water in it...
-
Old Machinist replied to the thread Statement from Messicks.Anytime you get a suspect email hover your mouse pointer over the sender. That should display the sender's email address. If it doesn't...
