Old Machinist's latest activity
-
Old Machinist reacted to dano7200's post in the thread Vevor hydraulic steering unit for B series? with
Like.
I find this steering power steering unit very interesting. It seems as though there is no actual pump on this? It creates 400lbs of... -
Old Machinist replied to the thread techno geeks.I fell for a craigslist scam once advertising free fill dirt. They were collecting phone numbers to spoof. They spoofed my number and I...
-
Old Machinist reacted to chim's post in the thread Need help removing this part from bushhog with Like.
If you want to use a Dremel, I'd start with a real grinder and take material away so the broken part looks like an upper case D with the...
-
Old Machinist replied to the thread Hydraulic cylinder rebuild kits.Kubota shows a model B1630 loader for that model tractor. Your best bet is probably to call Messics or your local dealer. Look on the...
-
Old Machinist reacted to tootall81's post in the thread Need help removing this part from bushhog with Like.
Going with this. Soon as I put the parts puller on it, it broke the tool. Just gonna cut it off. Hopefully its not as bad getting a new...
-
Old Machinist reacted to Flintknapper's post in the thread Need help removing this part from bushhog with Like.
^^^^^ This would be my approach as well. The Splined shaft (tapered or not) is essentially 'welded' to the boss of the stump jumper via...
-
Old Machinist reacted to marrmanu's post in the thread Need help removing this part from bushhog with Like.
I just pulled the stump jumper on my RCR1248 due to leaking out put shaft seal. The shaft is tapered as mentioned. I heated it up real...
-
Old Machinist replied to the thread Need help removing this part from bushhog.After reading all the other suggestions and mine I would take this approach. Don't even mess with a puller or heat if you don't have...
-
Old Machinist reacted to Russell King's post in the thread Need help removing this part from bushhog with Like.
Not knowing the exact construction of your bush hog, I think you can now remove the gear box if that is in your plan. If that is not in...
-
Old Machinist replied to the thread Need help removing this part from bushhog.That is pretty obvious it's a splined hub on a splined shaft. It ain't gonna turn. You might be able to get a bearing puller on it. Heat...
-
Old Machinist replied to the thread What did you do to or on your Kubota today?.Just another afternoon of mowing.
-
-
Been lurking around here since I bought my new L3902 last December and decided it was time to register. I'm no stranger to...
-
Old Machinist replied to the thread Biobor.Biobor JF DOES have instructions for contaminated tanks as well as a preventative treatment for clean tanks. Just read the labels and it...
-
Old Machinist replied to the thread Biobor.Doesn't sound like an either/or product. I have only used Biobor JF for the last 8 years and haven't had any fuel related issues so I...
-
Old Machinist replied to the thread Installing bung plugs in fuel tanks... any thoughts or insight?.When my fuel gets delivered and I add the Biobor JF I stick the nozzle into the filler and run it a while. That cycles the fuel through...
