Old Machinist's latest activity
-
Old Machinist replied to the thread FEL while mowing..My LX rides better with the weight of the loader on so I just leave the bucket off. -
Nice! I took a little different approach when I made mine a couple years ago. Not saying my way was better, just another idea. When I...
-
Old Machinist replied to the thread Dipping toes in the world of Welding.I got by with and bragged on a 120V Lincoln SP100 for over 30 years. This year I upgraded to a Prime Weld 180 and I love it. Very...
-
Old Machinist replied to the thread Homemade Channel Iron Forks.Yeah I welded in the few places where it went outside and cleaned it up with the grinder some. It looks fine from 10 feet away. I seem...
-
Great job, fun reading and awesome pictures. If you want, the bigger plasma divots can be weld repaired and ground flush with an angle...
-
Here too. But using an outside template makes it easier. If I "slip" there is excess material that is easily dealt with as opposed to...
-
Some of you might have read my eBay skid steer plate saga but I will repeat it in this thread. I ordered a 5/16” thick skid steer blank...
-
-
Ok. I need scientifically minded folks to help with this one. Just cleaning out my car for the annual state required safety inspection...
-
Old Machinist replied to the thread Steering center moves continually..Sounds like the latter.
-
Old Machinist reacted to North Idaho Wolfman's post in the thread Steering center moves continually. with
Like.
Could be normal or it could be the center seal on the steering cylinder is going out. -
Old Machinist replied to the thread Up a creek.Stuck Brakes? Does the engine rev okay or sound labored? Have you cleaned out the radiator and screens?
-
For a different perspective, I have a slip clutch on my rotary cutter (LP RCR1860), and it has been great. In over 4 years of...
-
Old Machinist replied to the thread Securing factory warranty when buying from private seller.I got mixed answers on this when I bought my LX used. One dealer supposedly filled out transfer forms but I never heard back on that. I...
