number two's latest activity
-
Nnumber two reacted to Hugo Habicht's post in the thread One hour job takes..... Too long. Like this post. with
Love.
Somebody else mentioned it already: hammer a screwdriver through a stubborn filter and use that as a lever. It's going in the bin anyway. -
Nnumber two reacted to chim's post in the thread One hour job takes..... Too long. Like this post. with Like.
My go-to tools when there's a fight to be won. Either the Channellock 215 Filter Pliers that was on sale somewhere years ago or the...
-
Nnumber two reacted to airbiscuit's post in the thread One hour job takes..... Too long. Like this post. with Like.
They get tighter as you pull
-
NWorking on another project and I looked under the B3200 and saw a couple dead infant mice. Crap. Sidetracked again. I was counting on...
-
Nnumber two replied to the thread 2009 B2620 upgrade.I think you gain position control vs. the quarter-inching valve. Big win I think! Good Luck!
-
Nnumber two reacted to Nicksacco's post in the thread L35 - BT900 Separation and Derusting with Like.
Here are other things used in this project. The most valuable tool is this Optrel PAPR system for grinding and blasting. It will save...
-
Nnumber two reacted to Nicksacco's post in the thread L35 - BT900 Separation and Derusting with Love.
CONTINUING THE WORK..... At present, I am taking a rest from the grinding, and swearing. I've coated the L35 with Ospho, and giving it...
-
Nnumber two reacted to chim's post in the thread One hour job takes..... Too long. Like this post. with Like.
Since discovering how slippery printed cardboard is, the TV boxes, etc get saved and the creeper stays tucked away. The cardboard works...
-
N1.5 gallons: Wow! That’s near all of it! Hopefully no damage done. Not unusual for coolant temp sensors to not read accurately and...
-
Nnumber two reacted to Jjona5's post in the thread B2620 Fuel Gauge Stopped Working - Cant Find Anything About a Fix with Like.
I'm not sure about your gauge, but normally you can ground the wire going to the sending unit quickly and see if it shows full on the...
-
NJust wanted to give an update and thanks to The Old Hokie we found that the draft and 3 point levers were frozen together and were...
-
Nnumber two reacted to Runs With Scissors's post in the thread G 5200 F.I. leaking near the top with Like.
The first thing I would do Devil Dog, is to verify where the leak is coming from. I know nothing about your particular tractor, but I...
-
Nnumber two reacted to Runs With Scissors's post in the thread L35 - BT900 Separation and Derusting with Like.
If possible, I might keep soaking it for a few days. It’s hard to judge exactly how long is “good nuff”, but I have found that “longer...
-
Nnumber two reacted to GeoHorn's post in the thread Cannot get stuck heat seal out ... need advice or ideas with Like.
‘Nothing in this world can take the place of persistence. Talent will not; nothing is more common than unsuccessful men with talent...
-
Nnumber two reacted to PoTreeBoy's post in the thread B2620 Fuel Gauge Stopped Working - Cant Find Anything About a Fix with Like.
Fuel gauge circuits are pretty straight forward if you have the analog gauge. 12v power goes to the gauge first, then the other wire...