number two's latest activity
-
NThe fluid is straw colored. As the “bubble” at the top of the sight glass in McMXi’s photo indicates the back of the site glass is pure...
-
NFive years with a sight glass on two MX tractors and I've never needed to dye the hydraulic oil. Perhaps there's something special...
-
Nnumber two reacted to Runs With Scissors's post in the thread How to check hydrolic level in l2501 with
Love.
You will be glad you dyed that oil. It makes checking it a breeze. (I used the same stuff too) I keep mine “over filled” a little... -
NSuccess! After about 100 times of trying to slip the shaft into place, I got out the borescope and looked in. The coupler had come loose...
-
Nnumber two reacted to Russell King's post in the thread Barn Find - B6100e Motor wont turn over with Like.
I would probably get the head off of it and see what the cylinders look like. You can always just pull the glow plugs out and pour some...
-
Nnumber two reacted to Workerbee's post in the thread Barn Find - B6100e Motor wont turn over with Like.
Maybe pull the glow plugs or injectors out just in case theres oil in the upper cylinders.
-
Nnumber two reacted to Tractor Gal's post in the thread How to check hydrolic level in l2501 with Like.
I posted this above but just to be sure that you see it, I'll post again. I've used this and it works great. It's not green, it's red...
-
NThe fact that the outer mower decks fold up for transport makes sharpening a lot easier right. I have a Land Pride RC3712 folding...
-
NPicked this up off FB for $500. I gave the lady an extra $50 for bringing it to my house since she was 2.5 hours away from me. She was...
-
Nnumber two reacted to TheOldHokie's post in the thread L3902 HST - 3 point lift needs a small increase with Like.
3000 PSI liquid filled gauge 1/4 female NPT x JIC-06 male adapter 3/8 x 24 R16 hose with JIC-06 and JIC-08 female swivel ends JIC-08 x...
-
NThat is a great cab build. You should be making cabs for a living. Not sure the costs to build it but you could make a living building...
-
Nnumber two reacted to old and tired's post in the thread Carry All Platform as Ballast Box with Like.
I use a set of homemade forks (fixed width) to pickup 55 gal. drum of weights. Or an empty wooden box to carry tools. Loading and...
-
NI should also have noted that the tractor and all related equipment are under a 30 x 30 shed, and the shed has an electric fence all...
-
N@Elliott in GA nailed it. A good thief is not going to start it and drive off. If you want to stop the dumb thieves, just pull the main...
-
NPut a electric fencer and attach the lead to the tractor. If you want it to not look to obvious put up a small fence and back the...