number two's latest activity
-
NWhen my B2650 was purchased, it was spec'd with turf tires. As a deal "closer" I added a set of industrial R4's at a price I couldn't...
-
NWe still get the Lxx40 model here in NZ. Guess they think we won't be prepared to pay what it costs for all those doodads. They're...
-
NI like the idea of the remote start, but then again I guess it's a good idea to go out and start it and give a quick glance at the...
-
NFixing the transmission oil seals on the front driveshaft has been a "thing" for several years - Many owners have done it themselves -...
-
NI'm not up to speed on the size comparisons since Kubota started doing "X" / "LX" variants My personal experience is slight increases...
-
NThe tractor loves its T6 5w-40!
-
NKubota of Lynchburg did an overview of many of the new products also including the M6 Series 2.
-
NFirst look was "who blowed up da cab? But after a couple minutes it was more appealing. Aux lighting under the loader arms kind of...
-
NStay away from a B3350.
-
NYes, the LX2620 replaced the B2650. Lots of great info on this site. You just have to weigh the pro's and con's of each model and see...
-
NI purchased a new LX2620 in the Spring. It's done everything I've needed of it - no complaints. The meter now reads 40 hours. I...
-
NOne time I bought a 3 point 5' used snow blower in mid July... For cheap... Had plenty of time to give it some attention before...
-
Nnumber two reacted to chim's post in the thread BX2816 Snowblower Bare metal in the impeller housing with
Like.
Mine was painted with Pittsburg AUE two part paint that has been a real winner. Even with that coating, the stones / grit / sand etc... -
Nnumber two reacted to Mowbizz's post in the thread BX2816 Snowblower Bare metal in the impeller housing with Like.
^^^^^this^^^^^ The paint would last about one hour, I have found.
-
Nnumber two reacted to TheOldHokie's post in the thread Which hydraulic IN hose to buy for my B7500 tractor ? with Like.
You can buy a premade hose assembly with straight JIC swivels from Surplus Center for $14 and a 90 degree JIC swivel adapter for $4...