NorthwoodsLife's latest activity
-
NorthwoodsLife reacted to KubotaHawg's post in the thread Rear grader blade max weight recommendation? with
Like.
Appreciate everyone’s input—some follow up on my decision: This blade dwarfs my little LP 1260 BB. It’s built like a tank and I... -
That is my thought, there is never (well, occasionaaly a hose or fitting leak but usually just a drip that I fix quickly. But never any...
-
NorthwoodsLife replied to the thread Oil level inconsistant.At refill measure the capacity that you put in per the specs, and don't sweat it. Unless you have fluid leakage under the tractor...
-
-
My friend built me a rack that holds my grapple at chest height. I can easily see to connect/disconnect, it has safety chains on the...
-
Where the battery cable connects to the starter, there is also a 12-gauge wire that is on the same lug. Follow that wire from the...
-
NorthwoodsLife reacted to MtnViewRanch's post in the thread Rear grader blade max weight recommendation? with Like.
If anyone is serious about grading, they need heavy implements. Lightweight implements leave you with only being able to work with soft...
-
NorthwoodsLife reacted to KubotaHawg's post in the thread Rear grader blade max weight recommendation? with Like.
That was exactly my concern. I know my tractor will lift it, but again it is a light(er) tractor with only 29 hp so if I can't pull it...
-
NorthwoodsLife reacted to 85Hokie's post in the thread Best way to mount a hitch reciever on a BX 25 with BH. with Like.
It would be a bit easier to place the hitch on the front end loader. You can see what you are doing and you will be pushing the trailer...
-
NorthwoodsLife replied to the thread Best way to mount a hitch reciever on a BX 25 with BH..https://www.jufabworks.com/products/p/workmaster-plate-for-kubota-bx-series-with-48-qa-quick-attach-bucket I use the one on my LX all...
-
NorthwoodsLife replied to the thread Rear grader blade max weight recommendation?.Yep. Tail wagging the dog. Right into the ditch if not careful.
-
NorthwoodsLife reacted to D2Cat's post in the thread Rear grader blade max weight recommendation? with Like.
OP has a 29HP, 2600# tractor. To clean a ditch he will need a wild blade to reach where he needs to go, and he needs the weight of the...
-
NorthwoodsLife replied to the thread Rear grader blade max weight recommendation?.Thank you. OFFSET is key. My mistake. I thought that the OP had a much smaller tractor than an MX6. Be well. Tractor on.
-
NorthwoodsLife reacted to jyoutz's post in the thread Rear grader blade max weight recommendation? with Like.
My tear scraper blade weighs 1025# and it’s very useful for cutting ditches when tilted and offset. Rear blades are very useful IF they...
-
NorthwoodsLife replied to the thread Rear grader blade max weight recommendation?.My 2 cents. In my experience, back blades are good for snow clearing and spreading, not much else. If your box scraper isn't doing...