North Idaho Wolfman's latest activity
-
North Idaho Wolfman commented on Rweber4599's profile post.I think you're mistaken, @Bulldog didn't respond, he hasn't been on for many a year. -
North Idaho Wolfman replied to the thread ZL 600 rebuild.Send the person a PM
-
North Idaho Wolfman replied to the thread Repairing sanding belts.Been doing wood stuff for years and any old belt fails in no time at all. I personally have not found any adhesive or tape that will...
-
North Idaho Wolfman replied to the thread Rear PTO.Sounds more like it is not engaging the gears completely. I would check the linkage to make sure it moving into gear fully.
-
North Idaho Wolfman replied to the thread B7100 loader type.Looks like a B219 to me: https://www.kubotabooks.com/AutoIndex/index.php?dir=Loaders%20and%20buckets/&file=B219.pdf
-
North Idaho Wolfman reacted to ruger1980's post in the thread Anyone know the HP on the 2019 woods bb72.30 gearbox with
Like.
Their rating seems to be, in their own words, "based on field testing". Not sure what that means and if the rating is endorsed by the... -
North Idaho Wolfman replied to the thread B2150 hst front rims replacement.You are swapping all the numbers around If you have R1 8.3-24 or 12.4-16 rears, you need R1 6-12 fronts. If you have R3 or R4 13.6-16...
-
Looks like it will save me around 6-700.00 im not aware that i slip the clutch but will def be something I watch for now.
-
North Idaho Wolfman replied to the thread 1984 L345DT Refurbishment.Look at the color of the wire and match the wiring diagram. ;) Probably tail light
-
North Idaho Wolfman replied to the thread 1984 L345DT Refurbishment.There will not be a seat or PTO safety switch on that tractor. I'm pretty sure the only safety switch was the clutch pedal.
-
North Idaho Wolfman replied to the thread mx5200 dt clutch.I would put a good aftermarket clutch and pressure plate in it (will save you a ton of money) and keep a really close eye on slipping...
-
North Idaho Wolfman replied to the thread D1005 ( in Beta Marine 28 ) is not idling properly for a while after start - then runs good.The Booster part is 100% real and good, the cleaner part... well lets just say it's rolling dice at best. But in your situation, it's...
-
North Idaho Wolfman replied to the thread O ring question.You have 2, pull the one that's not damaged and match it.
-
North Idaho Wolfman reacted to 007kubotaguy's post in the thread Remove hydraulic spool valve from Kabota L175 with Like.
If you need a OEM block just send me message and I will send you one. This would loop the oil until you decide what you want to do.
-
Kind of like a customer a while back hounding me about what parts I was going to use on his truck. "Y'all aint gonna be using any of...