MtnViewRanch's latest activity

MtnViewRanch replied to the thread Summit Hydraulics multipliers and Scorpion Technologies control grips.

Here is the source. https://www.controlgrips.com/grips/ Also, for those of you concerned about diodes, don't be. Unless you are a...

Mar 14, 2025
MtnViewRanch reacted to McMXi's post in the thread MX6000 or M6060 with Like.

I have both of those models, and if it's one or the other, the M6060 every time. The MX6000 is a very capable tractor but there isn't...

Mar 12, 2025
MtnViewRanch replied to the thread Hydraulic side link fitment L3902.

The OEM side link is 1 9/16" wide. There is no "good" reason not to grind what you have down to fit. As far as your note regarding the...

Mar 10, 2025
MtnViewRanch replied to the thread Anyone with experience with a 8-ft wide heavy-duty box blade with hydraulic rippers.

According to LP website, the Land Pride BB2596 is rated for a 25-55HP machine. I think that if you do not want to be disappointed in...

Mar 3, 2025
MtnViewRanch replied to the thread Anyone with experience with a 8-ft wide heavy-duty box blade with hydraulic rippers.

I have zero experience with Cammond. Gannon used to be the major industrial machine box blade provider. The new owners apparently...
Mar 2, 2025
MtnViewRanch replied to the thread Anyone with experience with a 8-ft wide heavy-duty box blade with hydraulic rippers.

Look here, scroll to the bottom. 4C5 Industrial Box Scrapers, Currently the best that there is that I know of.

Mar 2, 2025
MtnViewRanch replied to the thread Rear Hydraulics.

I did, all stainless. This is what gets used most of the time for rear remotes. As in most rear remote levers that are not attached...

Feb 15, 2025
MtnViewRanch replied to the thread Rear Hydraulics.

Not to sidetrack the thread, but McMXi, what hole size adaptor did you get? 1/2" works perfect if you finish making the adaptor. It...
Feb 15, 2025
MtnViewRanch replied to the thread Rear Hydraulics.

A multiplier will work any implement that your existing control valve works. The only difference is unless you get maintained switches...

Feb 15, 2025
MtnViewRanch replied to the thread Rear Hydraulics.

Even if you spend the money for the factory valves, you still may end up needing a multiplier anyway. A good chance that before your...
Feb 15, 2025

Show older items

Top Bottom