Mr Haney's latest activity
-
Mr Haney reacted to whitetiger's post in the thread Oil Leak on Left Front Rim of L3710 4WD with
Like.
Usually, if it is leaking onto the wheel, it is the axle shaft seal. Remove the wheel, remove the cover bolts, and pull the cover off... -
Looks like your lugnuts are on backwards too. Bevel end faces the rim.....
-
Bevel Case seal takes about 2-3 hrs if you‘ve got the parts, and don’t make the mistake I made first time. (Remove ALL the old seal or...
-
Mr Haney replied to the thread Oil Leak on Left Front Rim of L3710 4WD.Thanks. I believe it's a bad seal and/or bearing. I topped it off so I could work today. The job doesn't look too tough.
-
Mr Haney posted the thread Oil Leak on Left Front Rim of L3710 4WD in Service, Repair & Maintenance.Is this from a worn-out axle seal? Are they a pain in the butt to replace? Thanks.
-
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.I don't think much of Kubota's stubborn black nylon push rivets, so in the process of replacing the rubber mats, I found much better...
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.I should also add that I turned the pins down 0.030", so in the future, the rust will have to be very severe to cause problems. A future...
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.Page 11.
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.Interesting fact, or so it seems: this mower's manual says 1) it will not start with the hood up, and 2) if you raise the hood during...
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.I mowed yesterday. The anti-scalp wheels are not finished, but the yard was a foot tall, and I refuse to use the John Deere, so I did...
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.That is amazing. It's a good thing you posted that, because finding the information with a search engine was pretty much impossible...
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.Normal bubble wrap and two pieces of tape would have worked perfectly.
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.Turned out the turpentine dried faster than I thought, so the whole ordeal lasted less than an hour. The fenders appear to be okay...
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.It is amazing that intelligent people would ship a product covered with adhesive. The answer is turpentine. Alcohol works slowly...
-
Mr Haney replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.Here's some great news. Coleman's ships fenders covered with adhesive bubble wrap. Maybe they come that way from Kubota. This stuff...
