Recent content by motionclone

Got it running no problem and no smoke, no blow by. So appears in good shape. It idles at 2600 and max rpm is 3600. Does that mean i can back off the idle screw so it will idle at say 1000rpm or are things calibrated differently inside injection pump for a 2600rpm idle speed? It does appear...

I Know its a z482 but im finding nothing about the details on it as it doesnt fit any sub models that google comes up with. The exact number is z482 -410262 . Ive found no stickers with more model info, only a sticker that says z482. I know it came from a sailboat as the power unit for a...

If the guy in the hole is the owner of the company, OSHA rules dont apply, he can be as dumb as he wants. If he puts an employee at risk thats a different story.

Thanks for all the input! The AC is actually starting to act up again. Blows barely cold at idle. Shutting it off then back on makes it blow cold again. Its done this twice now. And the compressor repair was about 15 days ago..lol All this work is being done at a ford dealership and under...

2020 F350 with 7.3 gas, 25k miles. Broke down on side of the road and had to be towed to stealership. Loss of all power like the fuel or spark got shut off. Engine dead, would crank but not restart. Service said it was a dirty MAF sensor, replaced and all is good for now. BUT just 20 miles...

Careful, they bite. This one was close to you i believe. https://wgme.com/news/local/woman-bit-by-a-bear-in-porter#

I did look close at those pins and sockets and didnt see any green or anything abnormal. I did NOT try the new over on the pass side to see what happens though. Ill have to try this weekend, but what would it mean if it did or didnt?

I get an abs light and code c0035 by just plugging the new one into the truck side connector with the rest of the sensor dangling on the ground not even hooked to the wheel hub, delete the code it comes right back. Ive had it both fully installed and not installed just plugged in both result in...

Where you able to get a code and what was it during your issue? Sure sounds like i got a wire problem somewhere similar to yours

i think thats the next step. i just need to locate the other end of those wires for the sensor. I DID try the jiggle method on every wire and harness i could see that i thought would contain the sensor wires and nothing i did triggered a fault again.

ill have to trace that wire further and find where it plugs into abs computer...if i dont sell the thing first

seems tight and no noises. otherwise i would guess that to be the original issue if not the sensor itself but my symptoms are weird. Plugging the old sensor back in made the fault codes stop. 2 New sensors from 2 places cause a c0035 code to reoccur. This all while on jackstands, no wheel...

Yeah both a napa and an advance auto sensor seemed tonot work indicating to me the problem is not the sensor but wiring up stream. but putting the old sensor in stopped further fault codes or abs light from coming on....for a while anyway

probably what it is but how does a new sensor not fix the problem but putting the old sensor in fix it?

I made the poor decision to once again try driving a GM product and now im paying for it. 2015 GMC Denali 1500, 110,000miles. ABS/STABILI trac light and warnings came on and went off 257 times the other day while on a 1.5 hour mission. Each warning gave rapid, loud very distracting tones and...