Recent content by mini4mw

Thanks that was it. I had poppet flat face out and then spring. Switched it to flat face in with the spring in the poppet and it's working correctly. Bucket still drops when it's not running maybe an inch every few minutes. The main reason for rebuild was for the bucket slowly dropping under...

Ok, now looking at video, it looks like it went spring in the hole, the poppet and I did poppet then spring. These are tear down pics. That means I have it opposite order. $#&#!!

I bought pretty much all the rebuild kits from messicks, took the control valve off and pulled it all apart and replaced all the seals, springs, bearings, etc. I replaced the 120 and 130 above. When I put it together I laid it down so I was stacking vertically so the springs stayed in place. I...

I have a L2900 w La480. It has an electric 3rd valve that used to control a snow plow left/right movement. Tractor has 1,000hrs. Shes old but runs well. My problem is when I go to raise the loader, it will drop slowly until pressure kicks in and it starts going up. When I'm holding...