Recent content by MGnoob

Thank you I just wanted to be sure. But you just gave me another good idea. well, I would like to mount my spools on the fel assembly itself… i’m gonna put it on the fender. The existing spools were for a snow plow, but I wanted them for rear hydraulics. I might just mount those on the left. I...

If you use a power beyond adapter sleeve to feed a second spool valve is it OK to tie into the return line of the first spool valve to return from the second valve? In an open centered system? seems like a stupid question in my mind. I’ve repaired a lot of hydraulic systems, but I don’t design...

my L175 already has the plate to take hydraulics off of the three-point hitch. The Loader, I have has the connector that would plug into a BX tractor I do not have the part that would go on a BX tractor to receive the hydraulic connections from the Loader because I have an L series tractor...

Frame (main L/H) 73626-55010 Frame (main R/H) 71626-55030

I already have a hydraulic take off there. I’m trying to get the mounts that go on either side of the tractor that the quick connect from the Loader sit on and lock onto. I’m sure we’ll be discussing my high hydraulic options later. it’s in the photo above. Part 010 and 050. I have the...

I suppose I could always go to the dealership and make me a cardboard stencil and do some measuring aswell… just curious if anybody else already has the information

parts 010, 050

I’m looking for la344 loader mounting brackets or someone to make me a template of the ones on their machine with a few measurements. I won’t be spending $1000 to buy them from Kubota I’m going to put in LA344S on my L175. I have the Loader minus the mounts, joystick, tractor side hydraulic...

Thank you very much. The thread mentioned was how I realize that you can’t just block them off. I’m also not completely ignorant to hydraulics. I’d like to think when I move past just thinking about it I would’ve realized it but either way I’m glad I read about it. I’m not sure if they were...

It is my understanding that I can’t just plug this off at the hydraulic cover. Is that correct? I want to remove it because it’s leaking and currently serves no purpose. I’m likely to replace it to operate a hydraulic top link and side link for the three-point hitch. It was for a plow. so for...

Excellent. Thank you I’m also on the lookout for the pulley that goes on that shaft I may utilize that for the attachment point if I pursue it. fingers crossed, I should be picking up a loader on Wednesday. This one’s on a machine and is functional. I believe it to be running off the machines...

Both useful suggestions. I did get it off. I will be disassembling that brush hog and addressing the gear box. Likely with a replacement and rebuild the other one and put it on the shelf for later. I picked up another free brush hog..it didn’t turn but everything looked promising.. I inspected...

The current shaft on the gearbox has a 7/16 shear pin. Can I just buy this and drill out the 7/16 hole on my driveshaft to half inch? I’m worried about damaging my tractor. I have another stupid question when I I picked up the tractor it still had the shaft on the PTO with no implement which I...

I like that answer. Is there any way to shim the horizontal shaft further into the vertical shaft to gain more engagement? I’ve never worked on these. I’m not completely inexperienced with gears and hack jobs.

I’m looking for Parts to rebuild what I believe to be an FMC sidewinder.. i’ll attach some photos. I wish I took better ones when I had it apart. what I found interesting is the horizontal shaft is just a shaft with a gear on it. It doesn’t look like the other ones I’ve seen on YouTube for...